A parallel-plate capacitor of area A, plate separation d, and capacitance C is filled with four dielectric materials having dielectric constants $k_1,k_2,k_{3 }$and $k_4$ as shown in the figure below. If a single dielectric material is to be used to have the same capacitance C in this capacitor, then its dielectric constant k is given by

       

(a) $k=k_1+k_2+k_3+3k_4$

(b) $k=\frac{2}{3}\left(k_1+k_2+k_3\right)+2k_4$

(c) $\frac{2}{k}=\frac{3}{k_1+k_2+k_3}+\frac{1}{k_4}$

(d) $\frac{1}{k}=\frac{1}{k_1}+\frac{1}{k_2}+\frac{1}{k_3}+\frac{3}{2k_4}$

A capacitor of 2$\mu F$ is charged as shown in the figure. When the switch S is turned to position 2, the percentage of its stored energy dissipated is

1. 20%               2. 75%

3. 80%               4. 0%

A parallel plate air capacitor of capacitance C is connected, to a cell of emf V and then disconnected from it. A dielectric slab of dielectric constant K, which can just fill the air gap of the capacitor, is now inserted in it. Which of the following is incorrect?

(1) The potential difference between the plates decreases K times

(2) The energy stored in the capacitor decreases K times

(3) The change in energy stored is $\frac{1}{2}$CV^{2$\left(\frac{1}{K}-1\right)$}

(4) The charge on the capacitor is not conserved

A parallel plate air capacitor has capacity C, distance of separation between plates is d and potential difference V is applied between the plates. Force of attraction between the plates of the parallel plate air capacitor is

(1)C²V²/2d

(2)CV²/2d

(3)CV²/d

(4)C²V²/2d²

Two thin dielectric slabs of dielectric constants \(K_1~\text{and}~K_2(K_{1} < K_{2})\) are inserted between plates of a parallel capacitor, as shown in the figure. The variation of electric field \(E\) between the plates with distance \(d\) as measured from plate \(P\) is correctly shown by:  
   

1.		2.
3.		4.

Four point charges \(-Q, -q,2q~\text{and}~2Q\)$$ are placed, one at each corner of the square. The relation between \(Q\) and \(q\) for which the potential at the center of the square is zero, is:

Two metallic spheres of radii 1 cm and 3 cm

are given charges of -1$\times {10}^{-2}\mathrm{C}$ and $5\times {10}^{-2}\mathrm{C}$,

respectively. If these are connected by a conducting

wire, the final charge on the bigger sphere is

(a) $2\times {10}^{-2}\mathrm{C}$

(b) $3\times {10}^{-2}\mathrm{C}$

(c) $4\times {10}^{-2}\mathrm{C}$

(d) $1\times {10}^{-2}\mathrm{C}$

A parallel plate condenser has a uniform electric

field E(V/m) in the space between the plates. If

the distance between the plates is d(m) and area

of each plate is $\mathrm{A}\left({\mathrm{m}}^2\right)$, the energy (joule) stored

in the condenser is

(a) $\frac{1}{2}{\mathrm{\epsilon }}_0{\mathrm{E}}^2$

(b) ${\mathrm{\epsilon }}_0\mathrm{EAd}$

(c) $\frac{1}{2}{\mathrm{\epsilon }}_0{\mathrm{E}}^2\mathrm{Ad}$

(d) ${\mathrm{E}}^2\mathrm{Ad}/{\mathrm{\epsilon }}_0$

Four electric charges +q, + q, -q and -q are placed at the corners of a square of side 2L (see figure). The electric potential at point A, mid-way between the two charges +q and +q, is

(a)  $\frac{1}{4{\mathrm{\pi \epsilon }}_0}\frac{2\mathrm{q}}{\mathrm{L}}\left(1+\frac{1}{\sqrt{5}}\right)$

(b)    $\frac{1}{4{\mathrm{\pi \epsilon }}_0}\frac{2\mathrm{q}}{\mathrm{L}}\left(1-\frac{1}{\sqrt{5}}\right)$

(c)    Zero

(d)  $\frac{1}{4{\mathrm{\pi \epsilon }}_0}\frac{2\mathrm{q}}{\mathrm{L}}\left(1+\sqrt{5}\right)$