An inductor of inductance \(L\) and resistor of resistance \(R\) are joined in series and connected by a source of frequency \(\omega\). The power dissipated in the circuit is:

1.	\(\dfrac{\left( R^{2} +\omega^{2} L^{2} \right)}{V}\)	2.	\(\dfrac{V^{2} R}{\left(R^{2} + \omega^{2} L^{2} \right)}\)
3.	\(\dfrac{V}{\left(R^{2} + \omega^{2} L^{2}\right)}\)	4.	\(\dfrac{\sqrt{R^{2} + \omega^{2} L^{2}}}{V^{2}}\)

In an \(LCR\) circuit, the potential difference between the terminals of the inductance is \(60\) V, between the terminals of the capacitor is \(30\) V and that between the terminals of the resistance is \(40\) V. The supply voltage will be equal to:

1. \(50\) V

2. \(70\) V

3. \(130\) V

4. \(10\) V

In a circuit, \(L, C\) and \(R\) are connected in series with an alternating voltage source of frequency \(f.\) The current leads the voltage by \(45^{\circ}\). The value of \(C\) will be:

For the series LCR circuit shown in the figure, what is the resonance frequency and the amplitude of the current at the resonating frequency ?

1. 2500 rad/s and $5\sqrt{2}A$

2. 2500 rad/s and 5A

3. 2500 rad/s and $\frac{5}{\sqrt{2}}A$

4. 25 rad/s and $5\sqrt{2}A$

In an LR-circuit, the inductive reactance is equal to the resistance R of the circuit. An e.m.f. $E=E_0\cos \left(\omega t\right)$ applied to the circuit. The power consumed in the circuit is:

1. $\frac{E_0^2}{R}$

2. $\frac{E_0^2}{2R}$

3. $\frac{E_0^2}{4R}$

4. $\frac{E_0^2}{8R}$

One 10 V, 60 W bulb is to be connected to 100 V line. The required induction coil has a self-inductance of value: (f = 50 Hz) 

1. 0.052 H

2. 2.42 H

3. 16.2 mH

4. 1.62 mH

In the circuit given below, what will be the reading of the voltmeter 

1. 300 V

2. 900 V

3. 200 V

4. 400 V

In the circuit shown below, what will be the readings of the voltmeter and ammeter?
             

1. \(800~\text{V}, 2~\text{A}\)
2. \(300~\text{V}, 2~\text{A}\)
3. \(220~\text{V}, 2.2~\text{A}\)
4. \(100~\text{V}, 2~\text{A}\)

In the circuit shown in figure neglecting source resistance the voltmeter and ammeter reading will respectively, will be 

1. 0V, 3A

2. 150V, 3A

3. 150V, 6A

4. 0V, 8A

In the circuit shown in the figure, the ac source gives a voltage $V=20\cos \left(2000\text{\hspace{0.17em}}t\right).$ Neglecting source resistance, the voltmeter and ammeter reading will be: 

1. 0V, 0.47A

2. 1.68V, 0.47A

3. 0V, 1.4 A

4. 5.6V, 1.4 A