Force between two identical bar magnets whose centres are r metre apart  is 4.8 N, when their axes are in the same line. If separation is increased to 2r, the force between them is reduced to

1. 2.4N                         2. 1.2N

3. 0.6N                         4. 0.3N

A bar magnet of magnetic moment 10⁴J/T is free to rotate in a horizontal plane. The work done in rotating the magnet slowly from a direction parallel to a horizontal magnetic field of 4×10^–5 T to a direction 60° from the field will be

1. 0.2 J                          2. 2.0 J

3. 4.18 J                        4. 2 × 10² J

Two equal bar magnets are kept as shown in the figure. The direction of the resultant magnetic field, indicated by arrowhead at the point \(P\) is: (approximately)

1.		2.
3.		4.

A magnet of magnetic moment $50\widehat{i }A-m^2$ is placed along the x-axis in a magnetic field $\overrightarrow{B}=(0.5\hat{i}+3.0\hat{j})T$. The torque acting on the magnet is

1. 175 $\hat{k}$ N-m

2. 150 $\hat{k}$ N-m

3. 75 $\hat{k}$ N-m

4. 25$\sqrt{37}$ $\hat{k}$ N-m

A bar magnet of length 3 cm has points A and B along its axis at distances of 24 cm and 48 cm on the opposite sides. Ratio of magnetic fields at these points will be

1. 8                               2. $\frac{1}{2\sqrt{2}}$

3. 3                               4. 4

A dip needle in a plane perpendicular to magnetic meridian will remain

1. Vertical

2. Horizontal

3. In any direction

4. At an angle of dip to the horizontal

If the angles of dip at two places are 30^o and 45^o respectively, then the ratio of horizontal  components of earth's magnetic field at the two places will be:
(Assume net magnetic field to be equal at the two places)

1. √3 : √2

2. 1 : √2

3. 1 : √3

4. 1 : 2

A line passing through places having zero value of magnetic dip is called

1. Isoclinic line            

2. Agonic line

3. Isogonic line            

4. Aclinic line

The earth's magnetic field at a certain place has a horizontal component 0.3 Gauss and the total strength 0.5 Gauss. The angle of dip is

1. ${\tan }^{-1}\left(\frac{3}{4}\right)$                     

2. ${\sin }^{-1}\left(\frac{3}{4}\right)$

3. ${\tan }^{-1}\left(\frac{4}{3}\right)$                     

4. ${\sin }^{-1}\left(\frac{3}{5}\right)$