If the volume of the given mass of a gas is increased four times and the temperature is raised from 27°C to 127°C. The isothermal elasticity will become

1. 4 times                               

2. 1/4 times

3. 3 times                               

4. 1/3 times

The compressibility of water is $4\times {10}^{-5}$ per unit atmospheric pressure. The decrease in volume of 100 cubic centimeter of water under a pressure of 100 atmosphere will be -

1. 0.4 cc         
2. $4\times {10}^{-5}cc$
3. 0.025 cc     
4. 0.004 cc 

If a rubber ball is taken at the depth of 200 m in a pool, its volume decreases by 0.1%. If the density of the water is $1\times {10}^{3}kg/m^3$ and $g=10m/s^2$, then the volume elasticity in  will be

1. ${10}^8$                                       

2. $2\times {10}^8$

3. ${10}^9$                                         

4. $2\times {10}^9$

When a pressure of 100 atmosphere is applied on a spherical ball, then its volume reduces by 0.01%. The bulk modulus of the material of the rubber in $dyne / c{m}^2$ is:

1. $10\times {10}^{12}$                               

2. $100\times {10}^{12}$

3. $1\times {10}^{12}$                                 

4. $20\times {10}^{12}$

A uniform cube is subjected to volume compression. If each side is decreased by 1%, then bulk strain is

1. 0.01                             

2. 0.06

3. 0.02                             

4. 0.03

A ball falling in a lake of depth 200 m shows 0.1% decrease in its volume at the bottom. What is the bulk modulus of the material of the ball

1. $19.6\times {10}^{8}N/m^2$               

2. $19.6\times {10}^{-10}N/m^2$

3. $19.6\times {10}^{10}N/m^2$               

4. $19.6\times {10}^{-8}N/m^2$

The Bulk modulus for an incompressible liquid is

1. Zero                                           

2. Unity

3. Infinity                                       

4. Between 0 to 1

The ratio of lengths of two rods \(A\) and \(B\) of the same material is \(1:2\) and the ratio of their radii is \(2:1\). The ratio of modulus of rigidity of \(A\) and \(B\) will be:

When a spiral spring is stretched by suspending a load on it, the strain produced is called:

The Young's modulus of the material of a wire is \(6\times 10^{12}~\text{N/m}^2\) and there is no transverse strain in it, then its modulus of rigidity will be:

1. \(3\times 10^{12}~\text{N/m}^2\)
2. \(2\times 10^{12}~\text{N/m}^2\)
3. \(10^{12}~\text{N/m}^2\)
4. None of the above