If the RMS current in a \(50~\text{Hz}\) AC circuit is \(5~\text{A}\), the value of the current \(\dfrac{1}{300}~\text{s}\) after its value becomes zero is:

An alternating current generator has an internal resistance \(R_{g}\) and an internal reactance \(X_{g}\). It is used to supply power to a passive load consisting of a resistance \(R_{g}\) and a reactance \(X_{L}\). For maximum power to be delivered from the generator to the load, the value of \(X_{L}\) is equal to:
1. zero
2. \(X_g\)
3. \(-X_g\)
4. \(R_g\)

Which of the following combinations should be selected for better tuning of an LCR circuit used for communication?
1. \(R = 20~\Omega,~L= 1.5~\text{H}, ~C = 35~\mu \text{F}\)
2. \(R = 25~\Omega,~L= 2.5~\text{H}, ~C = 45~\mu \text{F}\)
3. \(R = 15~\Omega,~L= 3.5~\text{H}, ~C = 30~\mu \text{F}\)
4. \(R = 25~\Omega,~L= 1.5~\text{H}, ~C = 45~\mu \text{F}\)

An inductor of reactance \(1~\Omega\) and a resistor of \(2~\Omega\)$\mathrm{}$ are connected in series to the terminals of a \(6~\text{V}\) (RMS) AC source. The power dissipated in the circuit is:
1. \(8~\text{W}\)
2. \(12~\text{W}\)
3. \(14.4~\text{W}\)
4. \(18~\text{W}\)

The output of a step-down transformer is measured to be \(24\) V when connected to a \(12\) W light bulb. The value of the peak current is:

Choose the correct options: