1. | increase. | 2. | decrease. |
3. | remain the same. | 4. | become zero. |
1. | \(8\) along the negative \(X\text-\)axis |
2. | \(8\) along the positive \(X\text-\)axis |
3. | \(16\) along the negative \(X\text-\)axis |
4. | \(16\) along the positive \(X\text-\)axis |
Three charges, each \(+q\), are placed at the corners of an equilateral triangle \(ABC\) of sides \(BC\), \(AC\), and \(AB\). \(D\) and \(E\) are the mid-points of \(BC\) and \(CA\). The work done in taking a charge \(Q\) from \(D\) to \(E\) is:
1. | \(\frac{3qQ}{4\pi \varepsilon_0 a}\) | 2. | \(\frac{3qQ}{8\pi \varepsilon_0 a}\) |
3. | \(\frac{qQ}{4\pi \varepsilon_0 a}\) | 4. | \(\text{zero}\) |
A parallel plate capacitor has a uniform electric field \(E\) in the space between the plates. If the distance between the plates is \(d\) and the area of each plate is \(A,\) the energy stored in the capacitor is:
1. \(\frac{E^2 Ad}{\varepsilon_0}\)
2. \(\frac{1}{2}\varepsilon_0E^2 Ad\)
3. \(\varepsilon_0EAd\)
4. \(\frac{1}{2}\varepsilon_0E^2 \)
Two metallic spheres of radii \(1~\text{cm}\) and \(3~\text{cm}\) are given charges of \(-1\times 10^{-2}~\text{C}\) and \(5\times 10^{-2} ~\text{C}\), respectively. If these are connected by a conducting wire, then the final charge on the bigger sphere is:
1. \(3\times 10^{-2}~ \text{C}\)
2. \(4\times 10^{-2}~\text{C}\)
3. \(1\times 10^{-2}~\text{C}\)
4. \(2\times 10^{-2}~\text{C}\)
1. | \(\dfrac{U}{2}\) | 2. | \(\dfrac{U}{4}\) |
3. | \(4U\) | 4. | \(2U\) |
Two charges q1 and q2 are placed 30 cm apart, as shown in the figure. A third charge q3 is moved along the arc of a circle of radius 40 cm from C to D. The change in the potential energy of the system is , where k is:
.
1. 8q2
2. 6q2
3. 8q1
4. 6q1
As per this diagram, a point charge \(+q\) is placed at the origin \(O.\) Work done in taking another point charge \(-Q\) from the point \(A,\) coordinates \((0,a),\) to another point \(B,\) coordinates \((a,0),\) along the straight path \(AB\) is:
1. | \( \left(\dfrac{-{qQ}}{4 \pi \varepsilon_0} \dfrac{1}{{a}^2}\right) \sqrt{2} {a}\) | 2. | zero |
3. | \( \left(\dfrac{qQ}{4 \pi \varepsilon_0} \dfrac{1}{{a}^2}\right) \dfrac{1}{\sqrt{2}} \) | 4. | \( \left(\dfrac{{qQ}}{4 \pi \varepsilon_0} \dfrac{1}{{a}^2}\right) \sqrt{2} {a}\) |
A network of four capacitors of capacity equal to is conducted to a battery as shown in the figure. The ratio of the charges on is:
1.
2.
3.
4.
The effective capacity of the network between terminals \(\mathrm{A}\) and \(\mathrm{B}\) is:
1. | \(6~\mu\text{F}~\) | 2. | \(20~\mu\text{F} ~\) |
3. | \(3~\mu\text{F}~\) | 4. | \(10~\mu\text{F}\) |