A circular disc of the radius \(0.2~\text m\) is placed in a uniform magnetic field of induction \(\dfrac{1}{\pi} \left(\dfrac{\text{Wb}}{\text{m}^{2}}\right)\) in such a way that its axis makes an angle of \(60^{\circ}\) with \(\vec {B}.\) The magnetic flux linked to the disc will be:
1. \(0.02~\text{Wb}\)
2. \(0.06~\text{Wb}\)
3. \(0.08~\text{Wb}\)
4. \(0.01~\text{Wb}\)
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
If a current is passed through a circular loop of radius \(R\) then magnetic flux through a coplanar square loop of side \(l\) as shown in the figure \((l<<R)\) is:
1. \(\dfrac{\mu_{0} I}{2} \dfrac{R^{2}}{l}\)
2. \(\dfrac{\mu_{0} I l^{2}}{2 R}\)
3. \(\dfrac{\mu_{0}I \pi R^{2}}{2 l}\)
4. \(\dfrac{\mu_{0} \pi R^{2} I}{l}\)
The radius of a loop as shown in the figure is \(10~\text{cm}.\) If the magnetic field is uniform and has a value \(10^{-2}~ \text{T},\) then the flux through the loop will be:
1. \(2 \pi \times 10^{-2}~\text{Wb}\)
2. \(3 \pi \times 10^{-4}~\text{Wb}\)
3. \(5 \pi \times 10^{-5}~\text{Wb}\)
4. \(5 \pi \times 10^{-4}~\text{Wb}\)
The magnetic flux linked with a coil varies with time as \(\phi = 2t^2-6t+5,\) where \(\phi \) is in Weber and \(t\) is in seconds. The induced current is zero at:
1. | \(t=0\) | 2. | \(t= 1.5~\text{s}\) |
3. | \(t=3~\text{s}\) | 4. | \(t=5~\text{s}\) |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A coil having number of turns \(N\) and cross-sectional area \(A\) is rotated in a uniform magnetic field \(B\) with an angular velocity \(\omega\). The maximum value of the emf induced in it is:
1. \(\frac{NBA}{\omega}\)
2. \(NBAω\)
3. \(\frac{NBA}{\omega^{2}}\)
4. \(NBAω^{2}\)
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
The current in a coil varies with time \(t\) as \(I= 3 t^{2} +2t\). If the inductance of coil be \(10\) mH, the value of induced emf at \(t=2~\text{s}\) will be:
1. \(0.14~\text{V}\)
2. \(0.12~\text{V}\)
3. \(0.11~\text{V}\)
4. \(0.13~\text{V}\)
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A bar magnet is released along the vertical axis of the conducting coil. The acceleration of the bar magnet is:
1. | greater than \(g\). | 2. | less than \(g\). |
3. | equal to \(g\). | 4. | zero. |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.
A wire loop is rotated in a magnetic field. The frequency of change of direction of the induced e.m.f. is:
1. | Twice per revolution | 2. | Four times per revolution |
3. | Six times per revolution | 4. | Once per revolution |
To unlock all the explanations of this course, you need to be enrolled.
To unlock all the explanations of this course, you need to be enrolled.