A transistor is operated in a common emitter configuration at constant collector voltage V_c = 1.5 V such that a change in the base current from 100 μA to 150 μA produces a change in the collector current from 5 mA to 10 mA. The current gain (β) is:

1. 67

2. 75

3. 100

4. 50

The voltage gain of an amplifier with 9% negative feedback is 10. The voltage gain without feedback will be:

1. 90

2. 10

3. 1.25

4. 100

A common emitter amplifier has a voltage gain of 50, an input impedance of 100 Ω and an output impedance of 200 Ω. The power gain of the amplifier is:

1. 500

2. 1000

3. 1250

4. 50

The device that can act as a complete electronic circuit is:

1. Junction diode

2. Integrated circuit

3. Junction transistor

4. Zener diode

In a transistor circuit shown here, the base current is  35 $\mathrm{\mu }$A  and the potential difference across emitter-base junction is 4.5 V. The value of the resistor R_b is:
                 

1. 128.5 k$\mathrm{\Omega }$

2. 257 k$\mathrm{\Omega }$

3. 380.05 k$\mathrm{\Omega }$

4. None of these

In a transistor, a change of 8.0 mA in the emitter current produces a change of 7.8 mA in the collector current. What change in the base current is necessary to produce the same change in the collector current?
1. 50 $\mathrm{\mu }$A 
2. 100 $\mathrm{\mu }$A
3. 150 $\mathrm{\mu }$A 
4. 200 $\mathrm{\mu }$A

An NPN transistor conducts when:

Transfer characteristics [output voltage (${\mathrm{V}}_{\mathrm{o}}$) vs input voltage (${\mathrm{V}}_{\mathrm{i}}$)] for a base biased transistor in CE configurations are as shown in the figure. For using the transistor as a switch, it is used:

1. In region III

2. Both in the region (I) and (III)

3. In region II

4. In region I