If potential \([\text{in volts}]\) in a region is expressed as \(V[x,y,z] = 6xy-y+2yz,\) the electric field \([\text{in N/C}]\) at point \((1, 1, 0)\) is:

1. \(- \left(3 \hat{i} + 5 \hat{j} + 3 \hat{k}\right)\) 2. \(- \left(6 \hat{i} + 5 \hat{j} + 2 \hat{k}\right)\)
3. \(- \left(2 \hat{i} + 3 \hat{j} + \hat{k}\right)\) 4. \(- \left(6 \hat{i} + 9 \hat{j} + \hat{k}\right)\)
Subtopic:  Relation between Field & Potential |
 84%
From NCERT
NEET - 2015
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A parallel plate air capacitor has capacitance \(C,\) the distance of separation between plates is \(d\) and potential difference \(V\) is applied between the plates. The force of attraction between the plates of the parallel plate air capacitor is:

1. \(\frac{C^2V^2}{2d}\) 2. \(\frac{CV^2}{2d}\)
3. \(\frac{CV^2}{d}\) 4. \(\frac{C^2V^2}{2d^2}\)
Subtopic:  Capacitance |
 70%
From NCERT
NEET - 2015
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A parallel plate air capacitor of capacitance \(C\) is connected to a cell of emf \(V\) and then disconnected from it. A dielectric slab of dielectric constant \(K,\) which can just fill the air gap of the capacitor is now inserted in it. Which of the following is incorrect?

1. the potential difference between the plates decreases \(K\) times.
2. the energy stored in the capacitor decreases \(K\) times.
3. the change in energy stored is \(\frac{1}{2}CV^{2}\left ( \frac{1}{K} -1\right )\)
4. the charge on the capacitor is not conserved.

Subtopic:  Energy stored in Capacitor |
 71%
From NCERT
NEET - 2015
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

Two thin dielectric slabs of dielectric constants \(K_1\) and \(K_2\) \((K_1<K_2)\) are inserted between plates of a parallel plate capacitor, as shown in the figure. The variation of electric field \('E'\) between the plates with distance \('d'\) as measured from the plate \(P\) is correctly shown by: 

   
1. 2.
3. 4.
Subtopic:  Dielectrics in Capacitors |
 78%
From NCERT
AIPMT - 2014
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A conducting sphere of the radius \(R\) is given a charge \(Q.\) The electric potential and the electric field at the centre of the sphere respectively are:

1. zero and \(\frac{Q}{4 \pi \varepsilon_0 {R}^2}\) 2. \(\frac{Q}{4 \pi \varepsilon_0 R}\) and zero
3. \(\frac{Q}{4 \pi \varepsilon_0 R}\) and \(\frac{Q}{4 \pi \varepsilon_0{R}^2}\) 4. both are zero
Subtopic:  Electric Potential |
 84%
From NCERT
AIPMT - 2014
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

In a region, the potential is represented by \(V=(x,y,z)=6x-8xy-8y+6yz,\) where \(V\) is in volts and \(x,y,z\) are in meters. The electric force experienced by a charge of \(2\) coulomb situated at a point \((1,1,1)\) is:
1. \(6\sqrt{5}~\text{N}\)
2. \(30~\text{N}\)
3. \(24~\text{N}\)
4. \(4\sqrt{35}~\text{N}\)

Subtopic:  Relation between Field & Potential |
 73%
From NCERT
AIPMT - 2014
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

\(A\), \(B\) and \(C\) are three points in a uniform electric field. The electric potential is: 

     
1. maximum at \(B\)
2. maximum at \(C\)
3. same at all the three points \(A, B\) and \(C\)
4. maximum at \(A\)
Subtopic:  Relation between Field & Potential |
 84%
From NCERT
AIPMT - 2013
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

An electric dipole of moment \(p\) is placed in an electric field of intensity \(E.\) The dipole acquires a position such that the axis of the dipole makes an angle \(\theta\) with the direction of the field. Assuming that the potential energy of the dipole to be zero when \(\theta = 90^{\circ}\), the torque and the potential energy of the dipole will respectively be:
1. \(pE\text{sin}\theta, ~-pE\text{cos}\theta\)
2. \(pE\text{sin}\theta, ~-2pE\text{cos}\theta\)
3. \(pE\text{sin}\theta, ~2pE\text{cos}\theta\)
4. \(pE\text{cos}\theta, ~-pE\text{sin}\theta\)

Subtopic:  Energy of Dipole in an External Field |
 82%
From NCERT
AIPMT - 2012
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

Four-point charges \(-Q, -q, 2q~\text{and}~2Q\) are placed, one at each corner of the square. The relation between \(Q\) and \(q\) for which the potential at the center of the square is zero is:

1. \(Q= -q\) 2. \(Q= -2q\)
3. \(Q= q\) 4. \(Q= 2q\)
Subtopic:  Electric Potential |
 76%
From NCERT
AIPMT - 2012
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

Two metallic spheres of radii \(1~\text{cm}\) and \(3~\text{cm}\) are given charges of \(-1\times 10^{-2}~\text{C}\) and \(5\times 10^{-2} ~\text{C}\), respectively. If these are connected by a conducting wire, then the final charge on the bigger sphere is:
1. \(3\times 10^{-2}~ \text{C}\)
2. \(4\times 10^{-2}~\text{C}\)
3. \(1\times 10^{-2}~\text{C}\)
4. \(2\times 10^{-2}~\text{C}\)

Subtopic:  Electric Potential |
 66%
From NCERT
AIPMT - 2012
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch