The breaking stress of a wire depends upon:

1. material of the wire.
2. length of the wire.
3. radius of the wire.
4. shape of the cross-section.
Subtopic:  Stress - Strain |
 76%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A steel cable with a radius of \(1.5~\text{cm}\) supports a chairlift at a ski area. If the maximum stress is not to exceed \(10^{8}~\text{N/m}^2\), what is the maximum load that the cable can support?
1. \(7.06\times 10^{4}~\text{N}\)
2. \(5.03\times 10^{4}~\text{N}\)
3. \(1.09\times 10^{4}~\text{N}\)
4. \(17\times 10^{4}~\text{N}\)

Subtopic:  Stress - Strain |
 76%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

The breaking stress of a wire going over a smooth pulley in the following question is \(2\times 10^{9}~\text{N/m}^2\). What would be the minimum radius of the wire used if it is not to break?

    

1. \(0.46\times10^{-6}~\text{m}\) 2. \(0.46\times10^{-4}~\text{m}\)
3. \(0.46\times10^{8}~\text{m}\) 4. \(0.46\times10^{-11}~\text{m}\)
Subtopic:  Stress - Strain |
 72%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

A light rod of length \(2~\text{m}\) is suspended from the ceiling horizontally by means of two vertical wires of equal length. A weight \(W\) is hung from the light rod as shown in the figure. The rod is hung by means of a steel wire of cross-sectional area \(A_1 = 0.1~\text{cm}^2\) and brass wire of cross-sectional area\(A_2 = 0.2~\text{cm}^2\). To have equal stress in both wires, \(\frac{T_1}{T_2}?\)

              

1. \(1/3\) 2. \(1/4\)
3. \(4/3\) 4. \(1/2\)
Subtopic:  Stress - Strain |
 75%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

To break a wire, a force of \(10^6~\text{N/m}^{2}\) is required. If the density of the material is \(3\times 10^{3}~\text{kg/m}^3,\) then the length of the wire which will break by its own weight will be:
1. \(34\) m
2. \(30\) m
3. \(300\) m
4. \(3\) m

Subtopic:  Stress - Strain |
 62%
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A uniform wire of length \(3\) m and mass \(10\) kg is suspended vertically from one end and loaded at another end by a block of mass \(10\) kg. The radius of the cross-section of the wire is \(0.1\) m. The stress in the middle of the wire is: (Take \(g=10\) ms-2)

1. \(1.4 \times10^4\) N/m2 2. \(4.8 \times10^3\) N/m2
3. \(96 \times10^4\) N/m2 4. \(3.5\times10^3\) N/m2
Subtopic:  Stress - Strain |
 66%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

lf \(\rho\) is the density of the material of a wire and \(\sigma\) is the breaking stress, the greatest length of the wire that can hang freely without breaking is:
1. \(\frac{2}{\rho g}\)
2. \(\frac{\rho}{\sigma g}\)
3. \(\frac{\rho g}{2 \sigma}\)
4. \(\frac{\sigma}{\rho g}\)

Subtopic:  Stress - Strain |
 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

One end of a uniform wire of length \(L\) and of weight \(W\) is attached rigidly to a point in the roof and a weight \(W_1\) is suspended from its lower end. If \(A\) is the area of cross-section of the wire, the stress in the wire at a height \(\frac{3L}{4}\) from its lower end is:
1. \(\frac{W+W_1}{A}\)
2. \(\frac{4W+W_1}{3A}\)
3. \(\frac{3W+W_1}{4A}\)
4. \(\frac{\frac{3}{4}W+W_1}{A}\)

Subtopic:  Stress - Strain |
 71%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A wire can sustain a weight of 10 kg before breaking. If the wire is cut into two equal parts, then each part can sustain a weight of:

1. 2.5 kg 2. 5 kg
3. 10 kg 4. 15 kg
Subtopic:  Stress - Strain |
 73%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

The length of an elastic string is \(a\) metre when the longitudinal tension is \(4\) N and \(b\) metre when the longitudinal tension is \(5\) N. The length of the string in metre when the longitudinal tension is \(9\) N will be:

1. \(a-b\) 2. \(5b-4a\)
3. \(2b-\frac{1}{4}a\) 4. \(4a-3b\)
Subtopic:  Hooke's Law |
 76%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch