The current \(i\) in an inductance coil varies with time \(t\) according to the graph shown in the figure. Which one of the following plots shows the variation of voltage in the coil with time?
1. | 2. | ||
3. | 4. |
A bar magnet is released along the vertical axis of the conducting coil. The acceleration of the bar magnet is:
1. | greater than \(g\). | 2. | less than \(g\). |
3. | equal to \(g\). | 4. | zero. |
A rod having length \(l\) and resistance \(R_0\) is moving with speed \(v\) as shown in the figure. The current through the rod is:
1. \(\frac{B l v}{\frac{R_{1} R_{2}}{R_{1} + R_{2}} + R_{0}}\)
2. \(\frac{Blv}{\left(\frac{1}{R_{1}} + \frac{1}{R_{2}} + \frac{1}{R_{o}}\right)^{2}}\)
3. \(\frac{B l v}{R_{1} + R_{2} + R_{0}}\)
4. \(\frac{B l v}{\frac{1}{R_{1}} + \frac{1}{R_{2}} + \frac{1}{R_{0}}}\)
1. | \(\dfrac{E^{2}}{2 R}\) | 2. | \(\dfrac{E^{2} L}{2 R^{2}}\) |
3. | \(\dfrac{E^{2} L}{R}\) \(\) | 4. | \(\dfrac{E^{2} L}{2 R}\) |
The coefficient of mutual inductance between two coils depends upon:
1. | medium between coils |
2. | separation between coils |
3. | orientation of coils |
4. | All of these |
1. | \(\dfrac{L}{l}\) | 2. | \(\dfrac{l}{L}\) |
3. | \(\dfrac{L^2}{l}\) | 4. | \(\dfrac{l^2}{L}\) |
Two coils have a mutual inductance of \(5\) mH. The current changes in the first coil according to the equation \(I=I_{0}\cos\omega t,\) where \(I_{0}=10~\text{A}\) and \(\omega = 100\pi ~\text{rad/s}\). The maximum value of emf induced in the second coil is:
1. \(5\pi~\text{V}\)
2. \(2\pi~\text{V}\)
3. \(4\pi~\text{V}\)
4. \(\pi~\text{V}\)
Eddy currents are used in:
1. Induction furnace
2. Electromagnetic brakes
3. Speedometers
4. All of these
The magnetic flux linked with a coil varies with time as \(\phi = 2t^2-6t+5,\) where \(\phi \) is in Weber and \(t\) is in seconds. The induced current is zero at:
1. | \(t=0\) | 2. | \(t= 1.5~\text{s}\) |
3. | \(t=3~\text{s}\) | 4. | \(t=5~\text{s}\) |
If a current is passed through a circular loop of radius \(R\) then magnetic flux through a coplanar square loop of side \(l\) as shown in the figure \((l<<R)\) is:
1. | \(\frac{\mu_{0} l}{2} \frac{R^{2}}{l}\) | 2. | \(\frac{\mu_{0} I l^{2}}{2 R}\) |
3. | \(\frac{\mu_{0} l \pi R^{2}}{2 l}\) | 4. | \(\frac{\mu_{0} \pi R^{2} I}{l}\) |