Consider a screw gauge without any zero error. What will be the final reading corresponding to the final state as shown?
It is given that the circular head translates \(P\) MSD in \({N}\) rotations. (\(1\) MSD \(=\) \(1~\text{mm}\).)
1. \( \left(\frac{{P}}{{N}}\right)\left(2+\frac{45}{100}\right) \text{mm} \)
2. \( \left(\frac{{N}}{{P}}\right)\left(2+\frac{45}{{N}}\right) \text{mm} \)
3. \(P\left(\frac{2}{{N}}+\frac{45}{100}\right) \text{mm} \)
4. \( \left(2+\frac{45}{100} \times \frac{{P}}{{N}}\right) \text{mm}\)
The velocity \(v\) of a particle at time \(t\) is given by \({v}={at}+\frac{{b}}{{t}+{c}}.\) The dimensions of \({a}\), \({b}\), and \({c}\) are respectively:
1. \( {\left[{LT}^{-2}\right],[{L}],[{T}]} \)
2. \( {\left[{L}^2\right],[{T}] \text { and }\left[{LT}^2\right]} \)
3. \( {\left[{LT}^2\right],[{LT}] \text { and }[{L}]} \)
4. \( {[{L}],[{LT}], \text { and }\left[{T}^2\right]}\)
The main scale of a vernier calliper has \(n\) divisions/cm. \(n\) divisions of the vernier scale coincide with \((n-1)\) divisions of the main scale. The least count of the vernier calliper is:
1. \(\dfrac{1}{(n+1)(n-1)}\) cm
2. \(\dfrac{1}{n}\) cm
3. \(\dfrac{1}{n^{2}}\) cm
4. \(\dfrac{1}{(n)(n+1)}\) cm
If \(97.52\) is divided by \(2.54\), the correct result in terms of significant figures is:
1. | \( 38.4 \) | 2. | \(38.3937 \) |
3. | \( 38.394 \) | 4. | \(38.39\) |
In which of the following, the number of significant figures is different from that in the others?
1. | \(2.303~\text{kg}\) | 2. | \(12.23~\text{m}\) |
3. | \(0.002\times10^{5}~\text{m}\) | 4. | \(2.001\times10^{-3}~\text{kg}\) |
In an experiment, the height of an object measured by a vernier callipers having least count of \(0.01~\text{cm}\) is found to be \(5.72~\text{cm}\). When no object is there between jaws of this vernier callipers, the reading of the main scale is \(0.1\) cm and the reading of the vernier scale is \(0.3~\text{mm}\). The correct height of the object is:
1. \( 5.72 ~\text{cm} \)
2. \( 5.59~\text{cm} \)
3. \( 5.85~\text{cm} \)
4. \( 5.69~\text{cm} \)
A thin wire has a length of \(21.7~\text{cm}\) and a radius of \(0.46~\text{mm}\). The volume of the wire to correct significant figures is:
1. | \( 0.15~ \text{cm}^3 \) | 2. | \( 0.1443~ \text{cm}^3 \) |
3. | \( 0.14~ \text{cm}^3 \) | 4. | \( 0.144 ~\text{cm}^3\) |
A screw gauge has the least count of \(0.01~\text{mm}\) and there are \(50\) divisions in its circular scale. The pitch of the screw gauge is:
1. | \(0.25\) mm | 2. | \(0.5\) mm |
3. | \(1.0\) mm | 4. | \(0.01\) mm |
1. | \(9.98\) m | 2. | \(9.980\) m |
3. | \(9.9\) m | 4. | \(9.9801\) m |
The sum of the numbers \(436.32,227.2,\) and \(0.301\) in the appropriate significant figures is:
1. | \( 663.821 \) | 2. | \( 664 \) |
3. | \( 663.8 \) | 4. | \(663.82\) |