The equivalent resistance between \(A\) and \(B\) for the mesh shown in the figure is:

A potential divider is used to give outputs of \(2~\text{V}\) and \(3~\text{V}\) from a \(5~\text{V}\) source, as shown in the figure.

In the circuit shown in the figure, the effective resistance between \(A\) and \(B\) is:

1. \(2~\Omega\)
2. \(4~\Omega\)
3. \(6~\Omega\)
4. \(8~\Omega\)

The effective resistance between points \(P\) and \(Q\) of the electrical circuit shown in the figure is:
            
1. \(\frac{2 R r}{\left(R + r \right)}\)
2. \(\frac{8R\left(R + r\right)}{\left( 3 R + r\right)}\)
3. \(2r+4R\)
4. \(\frac{5R}{2}+2r\)

Equivalent resistance across terminals \(A\) and \(B\) will be:

        
1. \(1~\Omega\)
2. \(2~\Omega\)
3. \(3~\Omega\)
4. \(4~\Omega\)

What is the reading of the voltmeter of resistance \(1200~\Omega\) connected in the following circuit diagram? 

1. \(2.5\) V

2. \(5.0\) V

3. \(7.5\) V

4. \(40\) V

In the circuit shown, the value of each of the resistances is \(r\). The equivalent resistance of the circuit between terminals \(A\) and \(B\) will be:
        
1. \(\frac{4r}{3}\)
2. \(\frac{3r}{2}\)
3. \(\frac{r}{3}\)
4. \(\frac{8r}{7}\)

What is the equivalent resistance of the circuit​​​​​?

1. \(6~\Omega\)
2. \(7~\Omega\)
3. \(8~\Omega\)
4. \(9~\Omega\)

The total current supplied to the circuit by the battery is:

1. \(1~\text{A}\)
2. \(2~\text{A}\)
3. \(4~\text{A}\)
4. \(6~\text{A}\)

A wire of resistance \(12~ \Omega \text{m}^{-1}\)${\mathrm{}}^{}$ is bent to form a complete circle of radius \(10~\text{cm}\). The resistance between its two diametrically opposite points, \(A\) and \(B\) as shown in the figure, is:
        
1. \(0.6\pi~\Omega\)$$
2. \(3\pi ~\Omega\)$$
3. \(61 \pi~ \Omega\)$$
4. \(6\pi~\Omega\)$$