A wire of resistance \(R\) is divided into \(10\) equal parts. These parts are connected in parallel, the equivalent resistance of such connection will be:
1. \(0.01R\)
2. \(0.1R\)
3. \(10R\)
4. \(100R\)
In the figure, the value of resistors to be connected between \(C\) and \(D\) so that the resistance of the entire circuit between \(A\) and \(B\) does not change with the number of elementary sets used is:
1. | \(R\) | 2. | \(R(\sqrt{3}-1)\) |
3. | \(3R\) | 4. | \(R(\sqrt{3}+1)\) |
A battery of emf \(10\) V is connected to resistance as shown in the figure below. The potential difference \(V_{A} - V_{B}\)
between the points \(A\) and \(B\) is:
1. \(-2\) V
2. \(2\) V
3. \(5\) V
4. \(\frac{20}{11}~\text{V}\)
What is the equivalent resistance of the circuit?
1. \(6~\Omega\)
2. \(7~\Omega\)
3. \(8~\Omega\)
4. \(9~\Omega\)
If each resistance in the figure is \(9~\Omega\), then the reading of the ammeter is:
1. \(5~\text{A}\)
2. \(8~\text{A}\)
3. \(2~\text{A}\)
4. \(9~\text{A}\)
Equivalent resistance across terminals \(A\) and \(B\) will be:
1. | \(1~\Omega\) | 2. | \(2~\Omega\) |
3. | \(3~\Omega\) | 4. | \(4~\Omega\) |
The total current supplied to the circuit by the battery is:
1. \(1~\text{A}\)
2. \(2~\text{A}\)
3. \(4~\text{A}\)
4. \(6~\text{A}\)
In circuit shown below, the resistances are given in ohms and the battery is assumed ideal with emf equal to \(3\) volt. The voltage across the resistance \(R_4\) is:
1. \(0.4\) V
2. \(0.6\) V
3. \(1.2\) V
4. \(1.5\) V
A battery of emf \(E\) and internal resistance \(r\) is connected to a variable resistor \(R\) as shown below. Which one of the following is true?
1. | Potential difference across the terminals of the battery is maximum when \(R=r\). |
2. | Power delivered to the resistor is maximum when \(R=r\). |
3. | Current in the circuit is maximum when \(R=r\). |
4. | Current in the circuit is maximum when \(R>>r\). |
The current in the arm \(CD\) of the circuit will be:
1.
2.
3.
4.