The following table is for which logic gate?
Input | Output | |
A | B | C |
0 | 0 | 1 |
0 | 1 | 1 |
1 | 0 | 1 |
1 | 1 | 0 |
1. AND
2. OR
3. NAND
4. NOT
Zener diode is used for:
1. rectification.
2. stabilisation.
3. amplification.
4. producing oscillations in an oscillator.
\(A\) | \(B\) | \(Y\) |
\(1\) | \(1\) | \(1\) |
\(1\) | \(0\) | \(0\) |
\(0\) | \(1\) | \(0\) |
\(0\) | \(0\) | \(0\) |
1. | The resistivity of a semiconductor increases with an increase in temperature. |
2. | Substances with an energy gap of the order of \(10\) eV are insulators. |
3. | In conductors, the valence and conduction bands may overlap. |
4. | The conductivity of a semiconductor increases with an increase in temperature. |
1. | widens the depletion zone. |
2. | increases the number of donors on the n side. |
3. | increases the potential difference across the depletion zone. |
4. | increases the electric field in the depletion zone. |
Of the diodes shown in the following diagrams, which one of the diodes is reverse biased?
1. | 2. | ||
3. | 4. |
The truth table for the following network is:
1. |
|
|||||||||||||||
2. |
|
|||||||||||||||
3. |
|
|||||||||||||||
4. | None of the above |
In semiconductors at room temperature:
1. | The valence band is completely filled and the conduction band is partially filled. |
2. | The valence band is completely filled. |
3. | The conduction band is completely empty. |
4. | The valence band is partially empty and the conduction band is partially filled. |
The peak voltage in the output of a half-wave diode rectifier fed with a sinusoidal signal without a filter is \(10\) V. The DC component of the output voltage is:
1. \(\frac{10}{\pi }\) V
2. \(10\) V
3. \(\frac{20}{\pi }\) V
4. \(\frac{10}{\sqrt{2}}\) V
For the given circuit of the \(\mathrm{p\text-n}\) junction diode, which of the following statements is correct?
1. | In F.B. the voltage across \(R\) is \(V\). |
2. | In R.B. the voltage across \(R\) is \(V\). |
3. | In F.B. the voltage across \(R\) is \(2V\). |
4. | In R.B. the voltage across \(R\) is \(2V\). |