1. | The resistivity of a semiconductor increases with an increase in temperature. |
2. | Substances with an energy gap of the order of \(10\) eV are insulators. |
3. | In conductors, the valence and conduction bands may overlap. |
4. | The conductivity of a semiconductor increases with an increase in temperature. |
1. | widens the depletion zone. |
2. | increases the number of donors on the n side. |
3. | increases the potential difference across the depletion zone. |
4. | increases the electric field in the depletion zone. |
Of the diodes shown in the following diagrams, which one of the diodes is reverse biased?
1. | 2. | ||
3. | 4. |
The truth table for the following network is:
1. |
|
|||||||||||||||
2. |
|
|||||||||||||||
3. |
|
|||||||||||||||
4. | None of the above |
In semiconductors at room temperature:
1. | The valence band is completely filled and the conduction band is partially filled. |
2. | The valence band is completely filled. |
3. | The conduction band is completely empty. |
4. | The valence band is partially empty and the conduction band is partially filled. |
In a p–n junction photocell, the value of the photo electromotive force produced by monochromatic light is proportional to:
1. | the intensity of the light falling on the cell. |
2. | the frequency of the light falling on the cell. |
3. | the voltage applied at the p–n junction. |
4. | the barrier voltage at the p–n junction. |
For the given circuit of the \(\mathrm{p\text-n}\) junction diode, which of the following statements is correct?
1. | In F.B. the voltage across \(R\) is \(V\). |
2. | In R.B. the voltage across \(R\) is \(V\). |
3. | In F.B. the voltage across \(R\) is \(2V\). |
4. | In R.B. the voltage across \(R\) is \(2V\). |
Reverse-bias applied to a junction diode:
1. | lowers the potential barrier |
2. | raises the potential barrier |
3. | increases the majority carrier current |
4. | increases the minority carrier's current |
The barrier potential of a \(\mathrm{p\text-n}\) junction diode does not depend on:
1. diode design
2. temperature
3. forward bias
4. doping density
Following diagram performs the logic function of:
1. AND gate
2. NAND gate
3. OR gate
4. XOR gate