The equivalent resistance between \(A\) and \(B\) for the mesh shown in the figure is:
1. | \(7.2\) \(\Omega\) | 2. | \(16\) \(\Omega\) |
3. | \(30\) \(\Omega\) | 4. | \(4.8\) \(\Omega\) |
A potential divider is used to give outputs of \(2~\text{V}\) and \(3~\text{V}\) from a \(5~\text{V}\) source, as shown in the figure.
Which combination of resistances, from the ones given below, \(R_1, R_2, ~\text{and}~R_3\) give the correct voltages?1. | \({R}_1=1~\text{k} \Omega, {R}_2=1 ~\text{k} \Omega, {R}_3=2 ~\text{k} \Omega\) |
2. | \({R}_1=2 ~\text{k} \Omega, {R}_2=1~\text{k} \Omega, {R}_3=2~\text{k} \Omega\) |
3. | \({R}_1=1 ~\text{k} \Omega, {R}_2=2~ \text{k} \Omega, {R}_3=2~ \text{k} \Omega\) |
4. | \({R}_1=3~\text{k} \Omega, {R}_2=2~\text{k} \Omega, {R}_3=2~ \text{k} \Omega\) |
In the circuit shown in the figure, the effective resistance between \(A\) and \(B\) is:
1. \(2~\Omega\)
2. \(4~\Omega\)
3. \(6~\Omega\)
4. \(8~\Omega\)
The effective resistance between points \(P\) and \(Q\) of the electrical circuit shown in the figure is:
1. | \(\frac{2 R r}{\left(R + r \right)}\) | 2. | \(\frac{8R\left(R + r\right)}{\left( 3 R + r\right)}\) |
3. | \(2r+4R\) | 4. | \(\frac{5R}{2}+2r\) |
Equivalent resistance across terminals \(A\) and \(B\) will be:
1. | \(1~\Omega\) | 2. | \(2~\Omega\) |
3. | \(3~\Omega\) | 4. | \(4~\Omega\) |
What is the reading of the voltmeter of resistance \(1200~\Omega\) connected in the following circuit diagram?
1. | \(2.5\) V | 2. | \(5.0\) V |
3. | \(7.5\) V | 4. | \(40\) V |
In the circuit shown, the value of each of the resistances is \(r\). The equivalent resistance of the circuit between terminals \(A\) and \(B\) will be:
1. | \(\dfrac{4r}{3}\) | 2. | \(\dfrac{3r}{2}\) |
3. | \(\dfrac{r}{3}\) | 4. | \(\dfrac{8r}{7}\) |
What is the equivalent resistance of the circuit?
1. \(6~\Omega\)
2. \(7~\Omega\)
3. \(8~\Omega\)
4. \(9~\Omega\)
The total current supplied to the circuit by the battery is:
1. \(1~\text{A}\)
2. \(2~\text{A}\)
3. \(4~\text{A}\)
4. \(6~\text{A}\)
A wire of resistance \(12~ \Omega \text{m}^{-1}\) is bent to form a complete circle of radius \(10~\text{cm}\). The resistance between its two diametrically opposite points, \(A\) and \(B\) as shown in the figure, is:
1. | \(0.6\pi~\Omega\) | 2. | \(3\pi ~\Omega\) |
3. | \(61 \pi~ \Omega\) | 4. | \(6\pi~\Omega\) |