A body is rolling without slipping on a horizontal surface and its rotational kinetic energy is equal to the translational kinetic energy. The body is 

1.  Disc

2.  Sphere

3.  Cylinder

4.  Ring

A wheel with a radius of \(20\) cm has forces applied to it as shown in the figure. The torque produced by the forces of \(4\) N at \(A\), \(8~\)N at \(B\), \(6\) N at \(C\), and \(9~\)N at \(D\), at the angles indicated, is:

1. \(5.4\) N-m anticlockwise

2. \(1.80\) N-m clockwise

3. \(2.0\) N-m clockwise

4. \(3.6\) N-m clockwise

The moment of inertia of a thin rectangular plate \(\text {ABCD}\) of uniform thickness about an axis passing through the centre \(\text O\) and perpendicular to the plane of the plate is 

1.  \(\text I_{1}   +   \text I_{2}\)

2.  \(\text I_{2}   +  \text I_{4}\)

3.  \(\text I_{1}   - \text   I_{3}\)

4.  \(\text I_{1}   +\text   I_{2  } +  \text I_{3}   + \text   I_{4}\)

The centre of a wheel rolling on a plane surface moves with a speed \(v_0.\) A particle on the rim of the wheel at the same level as the centre will be moving at speed:
1. zero
2. \(v_0\)
3. \(\sqrt{2}v_0\)
4. \(2v_0\)

Moment of inertia of a uniform cylinder of mass M, radius R and length l about an axis passing through its center and normal to its axis would be

1.  $\frac{{\mathrm{Ml}}^2}{12}$

2.  $\frac{{\mathrm{MR}}^2}{2}$

3.  $\mathrm{M}\left[\frac{{\mathrm{l}}^2}{12} + \frac{{\mathrm{R}}^2}{4}\right]$

4.  $\mathrm{M}\left[\frac{{\mathrm{l}}^2}{12} + \frac{{\mathrm{R}}^2}{2}\right]$

A particle moves along a circle of radius $\frac{20}{\mathrm{\pi }}m$ with constant tangential acceleration. If the velocity of the particle is 80 m/s at the end of the second revolution after motion has begin, the tangential acceleration is

1. 640 $\mathrm{\pi } \mathrm{m}/{\mathrm{s}}^2$

2. 160 $\mathrm{\pi } \mathrm{m}/{\mathrm{s}}^2$

3. 40 $\mathrm{\pi } \mathrm{m}/{\mathrm{s}}^2$

4. 40 $\mathrm{m}/{\mathrm{s}}^2$

If the radius of the earth is suddenly contracted to half of its present value, then the duration of the day will be of:

If a force acts on a body at a point away from the centre of mass, then 

1.  Linear acceleration changes 

2.  Angular acceleration changes 

3.  Both change 

4.  None of these

A sphere can not roll on:

1.  a smooth horizontal surface 

2.  a rough horizontal surface 

3.  a smooth inclined surface 

4.  a rough inclined surface