A coil having number of turns N and cross-sectional area A is rotated in a uniform magnetic field B with an angular velocity $\mathrm{\omega }$. The maximum value of the emf induced in it is –

1. $\frac{\mathrm{NBA}}{\mathrm{\omega }}$                             

2. $\mathrm{NBA\omega }$

3. $\frac{\mathrm{NBA}}{{\mathrm{\omega }}^2}$                             

4. ${\mathrm{NBA\omega }}^2$

In a circuit with a coil of resistance \(2~\Omega\), the magnetic flux changes from \(2.0\) Wb to \(10.0\) Wb in \(0.2~\text{s}\). The charge that flows in the coil during this time is:
1. \(5.0~\text{C}\)
2. \(4.0~\text{C}\)
3. \(1.0~\text{C}\)
4. \(0.8~\text{C}\)

A small square loop of wire of side l is placed inside a large square loop of wire of side L (L > l). The loop are coplanar and their centre coincide. The mutual inductance of the system is proportional to 

(1) l / L

(2) l² / L

(3) L/l

(4) L²/l

Two coils of self inductance L₁ and L₂ are placed closer to each other so that total flux in one coil is completely linked with other. If M is mutual inductance between them, then 

(1) M = L₁ L₂

(2) M = L₁/L₂

(3) $M=\sqrt{L_1{L}_2}$

(4) M = (L₁ L₂)²

A wooden stick of length $3\mathcal{l}$ is rotated about an end with constant angular velocity $\mathrm{\omega }$ in a uniform magnetic field B perpendicular to the plane of motion. If the upper one third of its length is coated with copper, the potential difference across the whole length of the stick is –

1. $\frac{9\mathrm{B\omega }{\mathcal{l}}^2}{2}$                           

2. $\frac{4\mathrm{B\omega }{\mathcal{l}}^2}{2}$

3. $\frac{5\mathrm{B\omega }{\mathcal{l}}^2}{2}$                           

4. $\frac{\mathrm{B\omega }{\mathcal{l}}^2}{2}$

A highly conducting ring of radius R is perpendicular to and concentric with the axis of a long solenoid as shown in fig. The ring has a narrow gap of width d in its circumference. The solenoid has a cross-sectional area A and a uniform internal field of magnitude B₀. Now beginning at t = 0, the solenoid current is steadily increased so that the field magnitude at any time t is given by B(t) = B₀ + αt where α > 0. Assuming that no charge can flow across the gap, the end of the ring which has an excess of positive charge and the magnitude of induced e.m.f. in the ring are respectively

(1) X, Aα

(2) X, πR²α

(3) Y, πA²α

(4) Y, πR²α

A wire in the form of a circular loop of radius 10 cm lies in a plane normal to a magnetic field of 100 T. If this wire is pulled to take a square shape in the same plane in 0.1 s, average induced emf in the loop is: 

1.  6.70 volt                   

2.  5.80 volt 

3.  6.75 volt                   

4.  5.75 volt

A superconducting loop of radius R has self inductance L. A uniform and constant magnetic field B is applied perpendicular to the plane of the loop. Initially current in this loop is zero. The loop is rotated by 180°. The current in the loop after rotation is equal to –

1. zero                                 

2. $\frac{{\mathrm{B\pi R}}^2}{\mathrm{L}}$

3. $\frac{2{\mathrm{B\pi R}}^2}{\mathrm{L}}$                           

4. $\frac{{\mathrm{B\pi R}}^2}{2\mathrm{L}}$

A small magnet is along the axis of a coil and its distance from the coil is 80 cm. In this position the flux linked with the coil are $4 \times {10}^{–5}$ weber turns. If the coil is displaced 40 cm towards the magnet in 0.08 second, then the induced emf produced in the coil will be -

1.  0.5 mV                       

2.  1 mV 

3.  7 mV                           

4.  3.5 mV

A long solenoid of diameter \(0.1\) m has \(2\times 10^{4}\) turns per meter. At the centre of the solenoid, a coil of \(100\) turns and a radius of \(0.01\) m is placed with its axis coinciding with the solenoid's axis.  The current in the solenoid reduces at a constant rate from \(0\) A to \(4\) A in \(0.05\) s. If the resistance of the coil is \(10\pi^2~\Omega\), the total charge flowing through the coil during this time is: