If ΔQ and ΔW represent the heat supplied to the system and  the work done on the system, respectively, then the first law of thermodynamics can be written as: (where ΔU is the internal energy)
1. ΔQ = ΔU + ΔW
2. ΔQ = ΔU – ΔW
3. ΔQ = ΔW – ΔU
4. ΔQ = –ΔU – ΔW

Subtopic:  First Law of Thermodynamics |
 65%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

In a thermodynamic process, pressure of a fixed mass of a gas is changed in such a manner that the gas molecules absorb 30 J of heat and 10 J of work is done by the gas. If the initial internal energy of the gas was 40 J, then the final internal energy will be -

(1) 30 J

(2) 20 J

(3) 60 J

(4) 40 J

Subtopic:  First Law of Thermodynamics |
 77%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

Can two isothermal curves cut each other?

1. Never
2. Yes
3. They will cut when the temperature is 0°C.
4. Yes, when the pressure is equal to the critical pressure.
Subtopic:  Types of Processes |
 77%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

An ideal gas A and a real gas B have their volumes increased from V to 2 V under isothermal conditions. The increase in internal energy 

(1) Will be same in both A and B

(2) Will be zero in both the gases

(3) Of B will be more than that of A

(4) Of A will be more than that of B

Subtopic:  Types of Processes |
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

The latent heat of vaporisation of water is \(2240~\text{J/gm}\). If the work done in the process of expansion of \(1~\text{g}\) is \(168~\text{J}\), then the increase in internal energy is:
1. \(2408~\text{J}\)
2. \(2240~\text{J}\)
3. \(2072~\text{J}\)
4. \(1904~\text{J}\)

Subtopic:  First Law of Thermodynamics |
 82%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

An ideal gas at \(27^{\circ}\text{C}\) is compressed adiabatically to \(\frac{8}{27}\) of its original volume. If \(\gamma = \frac{5}{3},\) then the rise in temperature will be:
1. \(450~\text{K}\)
2. \(375~\text{K}\)
3. \(225~\text{K}\)
4. \(405~\text{K}\)

Subtopic:  Types of Processes |
 77%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

If γ denotes the ratio of two specific heats of a gas, the ratio of slopes of adiabatic and isothermal PV curves at their point of intersection is 

(1) 1γ

(2) γ

(3) γ-1

(4) γ+1

Subtopic:  Types of Processes |
 75%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

Air in a cylinder is suddenly compressed by a piston, which is then maintained at the same position. With the passage of time 

(1) The pressure decreases

(2) The pressure increases

(3) The pressure remains the same

(4) The pressure may increase or decrease depending upon the nature of the gas

Subtopic:  Types of Processes |
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A polyatomic gas \(\left(\gamma = \frac{4}{3}\right)\) is compressed to \(\frac{1}{8}\) of its volume adiabatically. If its initial pressure is \(P_0,\) its new pressure will be:

1. \(8P_0\) 2. \(16P_0\)
3. \(6P_0\) 4. \(2P_0\)
Subtopic:  Types of Processes |
 86%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

For adiabatic processes γ=CpCv 

(1) PγV = constant

(2) TγV = constant

(3) TVγ1 = constant

(4) TVγ = constant

Subtopic:  Types of Processes |
 93%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch