A liquid is flowing in a horizontal uniform capillary tube under a constant pressure difference P. The value of pressure for which the rate of flow of the liquid is doubled when the radius and length both are doubled is
1. P
2.
3.
4.
We have two (narrow) capillary tubes T1 and T2. Their lengths are l1 and l2 and radii of cross-section are r1 and r2 respectively. The rate of flow of water under a pressure difference P through tube T1 is 8cm3/sec. If l1 = 2l2 and r1 =r2, what will be the rate of flow when the two tubes are connected in series and pressure difference across the combination is same as before (= P)
1. 4 cm3/sec
2. (16/3) cm3/sec
3. (8/17) cm3/sec
4. None of these
The Reynolds number of a flow is the ratio of
1. Gravity to viscous force
2. Gravity force to pressure force
3. Inertia forces to viscous force
4. Viscous forces to pressure forces
A liquid flows in a tube from left to right as shown in figure. and are the cross-sections of the portions of the tube as shown. Then the ratio of speeds will be
1.
2.
3.
4.
The pans of a physical balance are in equilibrium. If Air is blown under the right-hand pan then the right-hand pan will:
1. | move up | 2. | move down |
3. | move erratically | 4. | remain at the same level |
According to Bernoulli's equation
The terms A, B and C are generally called respectively:
1. Gravitational head, pressure head and velocity head
2. Gravity, gravitational head and velocity head
3. Pressure head, gravitational head and velocity head
4. Gravity, pressure and velocity head
A sniper fires a rifle bullet into a gasoline tank making a hole 53.0 m below the surface of gasoline. The tank was sealed at 3.10 atm. The stored gasoline has a density of 660 . The velocity with which gasoline begins to shoot out of the hole will be:
1. | 27.8 ms-1 | 2. | 41.0 ms-1 |
3. | 9.6 ms-1 | 4. | 19.7 ms-1 |
A tank is filled with water up to a height \(H.\) The water is allowed to come out of a hole \(P\) in one of the walls at a depth \(D\) below the surface of the water. The horizontal distance \({x}\) in terms of \(H\) and \({D}\) is:
1. \(x = \sqrt{D\left(H-D\right)}\)
2. \(x = \sqrt{\frac{D \left(H - D \right)}{2}}\)
3. \(x = 2 \sqrt{D \left(H-D\right)}\)
4. \(x = 4 \sqrt{D \left(H-D\right)}\)
A streamlined body falls through air from a height h on the surface of a liquid. If d and D(D > d) represents the densities of the material of the body and liquid respectively, then the time after which the body will be instantaneously at rest, is
1.
2.
3.
4.
As the temperature of water increases, its viscosity
1. Remains unchanged
2. Decreases
3. Increases
4. Increases or decreases depending on the external pressure