Three similar light bulbs are connected to a constant voltage dc supply as shown in Fig. 7.32. Each bulb operates at normal brightness and the ammeter (of negligible resistance) registers a steady current. The filament of one of the bulbs breaks. What happens to the ammeter reading and to the brightness of the remaining bulbs?

  Ammeter reading                      Bulb brightness

a. increases                                     increases

b. increases                                     unchanged

c. unchanged                                   unchanged

d. decreases                                    unchanged

तीन समान बल्ब एक नियत वोल्टता dc आपूर्ति से जुड़े हुए हैं, जैसा कि आरेख 7.32 में दर्शाया गया है। प्रत्येक बल्ब सामान्य दीप्त पर संचालित होता है और ऐमीटर (नगण्य प्रतिरोध का) अपरिवर्ती धारा अभिलिखित करता है। किसी एक बल्ब का तंतु टूट जाता है। ऐमीटर के पाठ्यांक और शेष बल्बों की दीप्त में क्या परिवर्तन होगा?

 

ऐमीटर का पाठ्यांक                                बल्ब की  दीप्ति

a. बढ़ता है                                         बढ़ता है 

b. बढ़ता है                                         अपरिवर्तित रहता है

c. अपरिवर्तित रहता है                            अपरिवर्तित रहता है

d. घटता है                                        अपरिवर्तित रहता है

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

If a resistance coil is made by joining in parallel two resistances each of 20Ω. An emf of 2V is applied across this coil for 100 seconds. The heat produced in the coil is

(1) 20 J

(2) 10 J

(3) 40 J

(4) 80 J

यदि 20Ω के दो प्रतिरोधों को समांतर क्रम में जोड़कर प्रतिरोधक कुंडली बनाई जाती है। इस कुंडली के मध्य 100 सेकंड के लिए 2V विभव आरोपित किया जाता है। कुंडली में उत्पन्न ऊष्मा ज्ञात कीजिए।

(1) 20 J

(2) 10 J

(3) 40 J

(4) 80 J

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

If I be the current limit of a fuse wire of length l and radius r, then select the appropriate relation

(1) I α l

(2) I α r2

(3) I α l0

(4) I α r0

यदि l लंबाई और r त्रिज्या के फ्यूज तार की धारा सीमा I है, तब उपयुक्त संबंध का चयन कीजिए-

(1) I α l

(2) I α r2

(3) I α l0

(4) I α r0

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

The resistivity of iron is 1 × 10–7 ohm m. The resistance of iron wire of particular length and thickness is 1 ohm. If the length and the diameter of wire both are doubled, then the resistivity in ohm m will be :

(1) 1 × 10–7

(2) 2 × 10–7

(3) 4 × 10–7

(4) 8 × 10–7

लोहे की प्रतिरोधकता 1 × 10–7 ohmहै। विशिष्ट लंबाई और मोटाई के लोहे के तार का प्रतिरोध 1ohm है। यदि तार की लंबाई और व्यास दोनों को दोगुना किया जाता है, तो ohmm में प्रतिरोधकता कितनी होगी?

(1) 1 × 10–7

(2) 2 × 10–7

(3) 4 × 10–7

(4) 8 × 10–7

 52%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

Through a semiconductor, an electric current is due to drift off:

(1) Free electrons

(2) Free electrons and holes

(3) Positive and negative ions

(4) Protons

एक अर्धचालक के माध्यम से, विद्युत धारा किसके प्रवाह के कारण होती है?

(1) मुक्त इलेक्ट्रॉन

(2) मुक्त इलेक्ट्रॉन और कोटर

(3) धनायन और ऋणायन

(4) प्रोटॉन

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

The positive temperature coefficient of resistance is for :

(1) Carbon

(2) Germanium

(3) Copper

(4) An electrolyte

प्रतिरोध का धनात्मक ताप गुणांक किसके लिए होता है?

(1) कार्बन

(2) जर्मेनियम

(3) तांबा

(4) वैद्युतअपघट्य

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

An electric wire of length ‘I’ and area of cross-section a has a resistance R ohms. Another wire of the same material having the same length and area of cross-section 4a has a resistance of :

(1) 4R

(2) R/4

(3) R/16

(4) 16R

 ‘l’ लंबाई और अनुप्रस्थ-काट क्षेत्रफल के विद्युत तार का प्रतिरोध ओम है। समान पदार्थ तथा समान लंबाई और 4a अनुप्रस्थ-काट क्षेत्रफल के तार का प्रतिरोध ज्ञात कीजिए:

(1) 4R

(2) R/4

(3) R/16

(4) 16R

 57%
From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

All of the following statements are true except 

(1) Conductance is the reciprocal of resistance and is measured in Siemens

(2) Ohm's law is not applicable at very low and very high temperatures

(3) Ohm's law is applicable to semiconductors

(4) Ohm's law is not applicable to electron tubes, discharge tubes and electrolytes

निम्नलिखित कथनों में से किस एक को छोड़कर सभी सत्य हैं?

(1) चालकता प्रतिरोध का व्युत्क्रम है और इसे सीमेंस द्वारा मापा जाता है।

(2) ओम का नियम बहुत निम्न और बहुत उच्च तापमान पर मान्य नहीं है।

(3) ओम नियम अर्धचालक के लिए मान्य है।

(4) ओम नियम इलेक्ट्रॉन नलिकाओं, विसर्जन नलिकाओं और वैद्युत अपघट्य पर मान्य नहीं है?

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

A, B, and C are voltmeters of resistance R, 1.5R, and 3R respectively as shown in the figure. When some potential difference is applied between X and Y, the voltmeter readings are VA, VB, and VC respectively. Then,


1. VA=VB=VC

2. VA≠VB=VC

3. VA=VB≠VC

4. VA≠VB≠VC

A, B, और C क्रमशः R, 1.5R और 3R प्रतिरोध के वोल्टमीटर हैं, जैसा कि आकृति में दर्शाया गया है। जब X और Y के मध्य कुछ विभवांतर आरोपित किया जाता है, तब वोल्टमीटर के पाठ्यांक क्रमशः VA, VB, और Vहैं। तब,


1. VA=VB=VC

2. VA≠VB=VC

3. VA=VB≠VC

4. VA≠VB≠VC

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

A steady current flows in a metallic conductor of non-uniform cross-section. The quantity/ quantities constant along the length of the conductor is/are :

(1) Current, electric field and drift speed

(2) Drift speed only

(3) Current and drift speed

(4) Current only

असमान अनुप्रस्थ काट के धात्विक चालक में स्थायी धारा प्रवाहित होती है। चालक की लंबाई के अनुदिश नियत राशि/राशियाँ है/हैं:

(1) धारा, विद्युत क्षेत्र और अपवाह वेग

(2) अपवाह वेग

(3) धारा और अपवाह वेग

(4) केवल धारा

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints