(Unbalanced equations)
[Y] May be prepared by which one of the following methods?
[A] By dehydration of malonic acid with
[B] By thermal decomposition of carbon sub-oxide in air.
[C] By heating potassium hyxacyaanoferrate (II) with conic
[D] By the action of conc. on charcoal
(असंतुलित समीकरण)
[Y] निम्नलिखित में से किस विधि द्वारा निर्मित किया जा सकता है?
[A] के साथ मैलोनिक अम्ल के निर्जलीकरण द्वारा
[B] वायु में कार्बन उप-ऑक्साइड के उष्मीय अपघटन द्वारा।
[C] सांद्र के साथ पोटेशियम हेक्सासाइनोफैरेट (II) को गर्म करके
[D] लकड़ी के कोयला पर सांद्र की क्रिया द्वारा।
Which of the following orders is correct?
(1) – Boiling Point
(2) – Thermal Stability
(3) – Basic Character
(4) – Bond Angle
(A) (1), (2) and (3) only (B) (2), (3) and (4) only
(C) (1), (3) and (4) only (D) (1), (2), (3) and (4).
निम्नलिखित में से कौन सा क्रम सही है?
(1) – क्वथनांक
(2) –ऊष्मीय स्थायित्त्व
(3) –क्षारीय लक्षण
(4) – बंध कोण
(A) (1), (2) और (3) केवल (B) (2), (3) और (4) केवल
(C) (1), (3) और (4) केवल (D) (1), (2), (3) और (4)
AlF3 is soluble in HF only in presence of KF. It is due to the formation of
(1) K3[AIF3H3]
(2) K3[AIF6]
(3) AlH3
(4) K[AIF3H]
AlF3 केवल KF की उपस्थिति में HF में घुलनशील है। यह किसके निर्माण के कारण है?
(a) K3[AIF3H3]
(b) K3[AIF6]
(c) AlH3
(d) K[AIF3H]
Which of the following halogen oxide is used for estimation of carbon monoxide in automobile exhaust gases?
(1)
(2)
(3)
(4)
निम्नलिखित में से कौन सा हैलोजन ऑक्साइड ऑटोमोबाइल रेचित गैसों में कार्बन मोनोऑक्साइड के आकलन के लिए उपयोग किया जाता है?
(a) (b)
(c) (d)
Thermally most stable compound is :
(1)
(2)
(3)
(4)
ऊष्मीय रूप से सबसे स्थायी यौगिक है:
(a) (b)
(c) (d)
In nitrogen family the H-M-H bond angle in the hybrides MH3 gradually becomes closer to 90o on going from N to Sb. This shows that gradually
(1) The basic strength of hybrides increases
(2) Almost pure p-orbitals are used for M-H bonding
(3) The bond energies of M-H bond increases
(4) The bond pairs of electrons becomes nearer to the central atom
नाइट्रोजन परिवार में संकर MH3 में H-M-H बंध कोण N से Sb की ओर जाने पर धीरे-धीरे 90o के करीब हो जाता है। यह दर्शाता है कि धीरे-धीरे
(A) संकर की क्षारीय सामर्थ्य बढ़ती है
(B) लगभग शुद्ध p-कक्षकों का उपयोग M-H बंधन के लिए किया जाता है
(C) M-H बंध की बंध ऊर्जा बढ़ जाती है
(D) इलेक्ट्रॉनों के बंध युग्म केंद्रीय परमाणु के करीब हो जाते हैं
dissolves in anhydrous to give a good conducting solution which contains :
एक अच्छा सुचालक विलयन देने के लिए निर्जल में घुल जाता है जिसमें होते हैं:
A non-metal M forms but does not form . Then incorrect statement regarding non-metal M is:
(a) M can form multiple bond
(b) M is of second period element
(c) Atomicity of non-metal is 4
(d) The range of oxidation number for M is +5 to -3
एक अधातु M, बनती है लेकिन नहीं बनती है। तब अधातु M के संबंध में गलत है:
(a) M बहु बंध बना सकते हैं
(b) M दूसरे आवर्त का तत्व है
(c) अधातु की परमाण्विकता 4 है
(d) M के लिए ऑक्सीकरण संख्या की सीमा +5 से -3 है
The correct order of bond length in the following oxyanion is :
(I) (II) (III)
(a) IIIIII (b) IIIIII
(c) IIIIII (d) IIIIII
निम्नलिखित ऑक्सो-ऋणायन में बंध लंबाई का सही क्रम है:
(I) (II) (II)
(a) IIIIII (b) IIIIII
(c) IIIIII (d) IIIIII