A physical quantity \(P\) is given by \(P=\dfrac{A^3 B^{1/2}}{C^{-4}D^{3/2}}.\) The quantity which contributes the maximum percentage error in \(P\) is:

1.	\(A\)	2.	\(B\)
3.	\(C\)	4.	\(D\)

If L = 2.331 cm, B = 2.1 cm, then L + B =?

1. 4.431 cm

2. 4.43 cm

3. 4.4 cm

4. 4 cm

The number of significant figures in the numbers \(25.12,\) \(2009,\) \(4.156\) and \(1.217\times 10^{-4}\) is:

If the length of rod A is 3.25 ± 0.01 cm and that of B is 4.19 ± 0.01 cm then the rod B is longer than rod A by 

(1) 0.94 ± 0.00 cm

(2) 0.94 ± 0.01 cm

(3) 0.94 ± 0.02 cm

(4) 0.94 ± 0.005 cm

A physical quantity is given by $X=M^a{L}^b{T}^c$. The percentage error in measurement of M, L and T are $\alpha ,\beta$ and $\gamma$ respectively. Then maximum percentage error in the quantity X is

1. $a\alpha +b\beta +c\gamma$

2. $a\alpha +b\beta -c\gamma$

3. $\frac{a}{\alpha }+\frac{b}{\beta }+\frac{c}{\gamma }$

4. None of these

A physical quantity \(A\) is related to four observable quantities \(a\), \(b\), \(c\) and \(d\) as follows, \(A= \frac{a^2b^3}{c\sqrt{d}},\) the percentage errors of measurement in \(a\), \(b\), \(c\) and \(d\) are \(1\%\), \(3\%\), \(2\%\) and \(2\%\) respectively. The percentage error in quantity \(A\) will be: 
1. \(12\%\)
2. \(7\%\)
3. \(5\%\)
4. \(14\%\)

If the acceleration due to gravity is 10 ms^–2 and the units of length and time are changed in kilometer and hour respectively, the numerical value of the acceleration is 

(1) 360000

(2) 72,000

(3) 36,000

(4) 129600

If L, C and R represent inductance, capacitance and resistance respectively, then which of the following does not represent dimensions of frequency? [This question includes concepts from the 12th syllabus]

(1) $\frac{1}{RC}$

(2) $\frac{R}{L}$

(3) $\frac{1}{\sqrt{LC}}$

(4) $\frac{C}{L}$

The number of particles crossing a unit area perpendicular to the \(x\)-axis in unit time is given by $$\(n= -D\frac{n_2-n_1}{x_2-x_1}\), where \(n_1\) and \(n_2\) are the number of particles per unit volume for the value of \(x\) equal to \(x_1\) and \(x_2\) respectively. The dimensions of \(D,\) known as the diffusion constant, will be:
1. \(\left[M^0LT^{2}\right]\)
2. \(\left[M^0L^2T^{-4}\right]\)
3. \(\left[M^0LT^{-3}\right]\)
4. \(\left[M^0L^2T^{-1}\right]\)

With the usual notations, the following equation $S_t=u+\frac{1}{2}a(2t-1)$ is

(1) Only numerically correct

(2) Only dimensionally correct

(3) Both numerically and dimensionally correct

(4) Neither numerically nor dimensionally correct