Three blocks of masses 2 kg, 3 kg and 5 kg are connected to each other with light string and are then placed on a frictionless surface as shown in the figure. The system is pulled by a force F = 10 N, then tension T1 =
(1) 1N
(2) 5 N
(3) 8 N
(4) 10 N
A body of weight 2kg is suspended as shown in the figure. The tension T1 in the horizontal string (in kg wt) is
(1)
(2)
(3)
(4) 2
One end of a massless rope, which passes over a massless and frictionless pulley P is tied to a hook C while the other end is free. Maximum tension that the rope can bear is 360 N. with what value of minimum safe acceleration (in ms–2) can a monkey of 60 kg move down on the rope
1. 16
2. 6
3. 4
4. 8
A light string passing over a smooth light pulley connects two blocks of masses m1 and m2 (vertically). If the acceleration of the system is g/8 then the ratio of the masses is
(1) 8 : 1
(2) 9 : 7
(3) 4 : 3
(4) 5 : 3
A block of mass 4 kg is suspended through two light spring balances A and B. Then A and B will read respectively
(1) 4 kg and zero kg
(2) Zero kg and 4 kg
(3) 4 kg and 4 kg
(4) 2 kg and 2 kg
Two masses M and M/2 are joint together by means of a light inextensible string passes over a frictionless pulley as shown in figure. When bigger mass is released the small one will ascend with an acceleration of
(1) g/3
(2) 3g/2
(3) g/2
(4) g
Two masses m1 and m2 (m1 > m2) are connected by massless flexible and inextensible string passed over massless and frictionless pulley. The acceleration of centre of mass is
(1)
(2)
(3)
(4) Zero
The mass of a body measured by a physical balance in a lift at rest is found to be m. If the lift is going up with an acceleration a, its mass will be measured as:
(1)
(2)
(3) m
(4) Zero
Three weights W, 2W and 3W are connected to identical springs suspended from a rigid horizontal rod. The assembly of the rod and the weights fall freely. The positions of the weights from the rod are such that
(1) 3W will be farthest
(2) W will be farthest
(3) All will be at the same distance
(4) 2W will be farthest
When forces F1, F2, F3 are acting on a particle of mass m such that F2 and F3 are mutually perpendicular, then the particle remains stationary. If the force F1 is now removed then the acceleration of the particle is
(1)
(2)
(3)
(4)