A transformer connected to 220 Volt line shows an output of 2 A at 11000 Volt. The efficiency is 100%. The current drawn from the line is:
1. 100 A
2. 200 A
3. 22 A
4. 11 A
The primary winding of transformer has 500 turns whereas its secondary has 5000 turns. The primary is connected to an ac supply of 20 V, 50 Hz. The secondary will have an output of
1. 200 V, 50 Hz
2. 2 V, 50 Hz
3. 200 V, 500 Hz
4. 2 V, 5 Hz
A step-down transformer is connected to main supply 200V to operate a 6V, 30W bulb. The current in primary is
1. 3 A
2. 1.5 A
3. 0.3 A
4. 0.15 A
A transformer has 100 turns in the primary coil and carries 8 A current. If input power is one kilowatt, the number of turns required in the secondary coil to have 500V output will be
1. 100
2. 200
3. 400
4. 300
The potential difference V and the current i flowing through an instrument in an ac circuit of frequency f are given by volts and I = 2 sin ωt amperes (where ω = 2πf). The power dissipated in the instrument is
1. Zero
2. 10 W
3. 5 W
4. 2.5 W
A generator produces a voltage that is given by V = 240 sin 120 t, where t is in seconds. The frequency and r.m.s. voltage are
1. 60 Hz and 240 V
2. 19 Hz and 120 V
3. 19 Hz and 170 V
4. 754 Hz and 70 V
If a current I given by flows in an ac circuit across which an ac potential of has been applied, then the power consumption P in the circuit will be
1.
2.
3.
4. P = 0
In an ac circuit, the current is given by and the ac potential is V = 200 sin(100t) volt. Then the power consumption is :
1. 20 watts
2. 40 watts
3. 1000 watts
4. 0 watt
In a LCR circuit having L = 8.0 henry, C = 0.5 μF and R = 100 ohm in series. The resonance frequency in radian per second is
1. 600 radian/second
2. 600 Hz
3. 500 radian/second
4. 500 Hz
The impedance of a circuit consists of 3 ohm resistance and 4 ohm reactance. The power factor of the circuit is :
1. 0.4
2. 0.6
3. 0.8
4. 1.0