In the circuit given below, what will be the reading of the voltmeter
(1) 300 V
(2) 900 V
(3) 200 V
(4) 400 V
In the circuit shown below, what will be the readings of the voltmeter and ammeter?
1. \(800~\text{V}, 2~\text{A}\)
2. \(300~\text{V}, 2~\text{A}\)
3. \(220~\text{V}, 2.2~\text{A}\)
4. \(100~\text{V}, 2~\text{A}\)
In the circuit shown in figure neglecting source resistance the voltmeter and ammeter reading will respectively, will be
(1) 0V, 3A
(2) 150V, 3A
(3) 150V, 6A
(4) 0V, 8A
In the circuit shown in the figure, the ac source gives a voltage Neglecting source resistance, the voltmeter and ammeter reading will be:
(1) 0V, 0.47A
(2) 1.68V, 0.47A
(3) 0V, 1.4 A
(4) 5.6V, 1.4 A
An ac source of angular frequency \(\omega\) is fed across a resistor \(r\) and a capacitor \(C\) in series. \(I\) is the current in the circuit. If the frequency of the source is changed to \(\frac{\omega}{3}\) (but maintaining the same voltage), the current in the circuit is found to be halved. Calculate the ratio of reactance to resistance at the original frequency \(\omega\).
1. | \(\sqrt{\dfrac{3}{5}}\) | 2. | \(\sqrt{\dfrac{2}{5}}\) |
3. | \(\sqrt{\dfrac{1}{5}}\) | 4. | \(\sqrt{\dfrac{4}{5}}\) |
1. | \(\frac{\sqrt{5} R}{2} ,\tan^{- 1} \left(2\right)\) | 2. | \(\frac{\sqrt{5} R}{2} , \tan^{- 1} \left(\frac{1}{2}\right)\) |
3. | \(\sqrt{5} X_{C} ,\tan^{- 1} \left(2\right)\) | 4. | \(\sqrt{5} R , \tan^{- 1} \left(\frac{1}{2}\right)\) |
In the adjoining ac circuit the voltmeter whose reading will be zero at resonance is
(1) V1
(2) V2
(3) V3
(4) V4
In the adjoining figure, the impedance of the circuit will be:
(1) 120 ohm
(2) 50 ohm
(3) 60 ohm
(4) 90 ohm
In a series \(LCR\) circuit, which one of the following curves represents the variation of impedance \((Z)\) with frequency \((f)\)?
1. | 2. | ||
3. | 4. |
The variation of the instantaneous current \((I)\) and the instantaneous emf \((E)\) in a circuit are shown in the figure. Which of the following statements is correct?
1. | The voltage lags behind the current by \(\frac{\pi}{2}\). |
2. | The voltage leads the current by \(\frac{\pi}{2}\). |
3. | The voltage and the current are in phase. |
4. | The voltage leads the current by \(\pi\). |