Symbolic representation of four logic gates
are shown as
(i)
(ii)
(iii)
(iv)
Pick out which ones are for AND, NAND and
NOT gates, respectively.
1. (iii), (ii)and (i)
2. (iii), (ii) and (iv)
3. (ii), (iv) and (iii)
4. (ii), (iii) and (iv)
If a small amount of antimony is added to germanium crystal
(1) the antimony becomes an acceptor atom
(2) there will be more free electrons than holes in the semiconductor
(3) its resistance is increased
(4) it becomes a p-type semiconductor
In forward biasing of the p-n junction
1. | the positive terminal of the battery is connected to n-side and the depletion region becomes thin |
2. | the positive terminal of the battery is connected to n-side and the depletion region becomes thick |
3. | the positive terminal of the battery is connected to p-side and the depletion region becomes thin |
4. | the positive terminal of the battery is connected to p-side and the depletion region becomes thick |
In the following figure, the diodes which are forward biased, are
1. III and IV only
2. I and III only
3. II only
4. II and IV only
1. | \(\mathrm{n}\text-\)type with electron concentration \(n_{e}=5\times10^{22}~\text{m}^{-3}\) |
2. | \(\mathrm{p}\text-\)type with electron concentration \(n_{e}=2.5\times10^{23}~\text{m}^{-3}\) |
3. | \(\mathrm{n}\text-\)type with electron concentration \(n_{e}=2.5\times10^{10}~\text{m}^{-3}\) |
4. | \(\mathrm{p}\text-\)type with electron concentration \(n_{e}=5\times10^{9}~\text{m}^{-3}\) |
A Zener diode, having breakdown voltage equal to \(15\) V, is used in a voltage regulator circuit, as shown in the figure. The current through the diode is:
1. \(10\) mA
2. \(15\) mA
3. \(20\) mA
4. \(5\) mA
Which one of the following statement is false?
(1) Pure Si doped with trivalent impurities gives a p-type semiconductor
(2) Majority carries in a n-type semiconductor are holes
(3) Minority carries in a p-type semiconductor are electrons
(4) The resistance of intrinsic semiconductor decreases with increase of temperature
The device that can act as a complete electronic circuit is
1. Junction diode
2. Integrated circuit
3. Junction transistor
4. Zener diode
The following figure shows a logic gate circuit with two inputs A and B and the output Y. The voltage waveforms of A, B and Y are as given
The logic gate is
1. gate
2. gate
3. gate
4. gate
For transistor action:
(a) | the base, emitter and collector regions should have similar size and doping concentrations. |
(b) | the base regions must be very thin and lightly doped. |
(c) | the emitter-base junction is forward biased and the base-collector junction is reverse biased. |
(d) | both the emitter-base junction as well as the base-collector junction are forward biased. |
Which of the following pairs of statements is correct?
1. (d) and (a)
2. (a) and (b)
3. (b) and (c)
4. (c) and (d)