In which one of the following cases will the liquid flow in a pipe be most streamlined  ?

(1) Liquid of high viscosity and high density flowing through a pipe of small radius

(2) Liquid of high viscosity and low density flowing through a pipe of small radius

(3) Liquid of low viscosity and low density flowing through a pipe of large radius

(4) Liquid of low viscosity and high density flowing through a pipe of large radius

Two water pipes of diameters 2 cm and 4 cm are connected with the main supply line. The velocity of flow of water in the pipe of 2 cm diameter is -

(1) 4 times that in the other pipe

(2) 3 times that in the other pipe

(3) 2 times that in the other pipe

(4) 6 times that in the other pipe

An incompressible liquid flows through a horizontal tube as shown in the following fig. Then the velocity v of the fluid is

(1)    3.0 m/s                          

(2) 1.5 m/s                     

(3) 1.0 m/s                             

(4) 2.25 m/s

The velocity of kerosene oil in a horizontal pipe is 5 m/s. If $\mathrm{g}=10\mathrm{m}/{\mathrm{s}}^2$, then the velocity head of oil will be:
1. 1.25 m
2. 12.5 m
3. 0.125 m                             
4. 125 m

In the following fig. is shown the flow of liquid through a horizontal pipe. Three tubes A, B and C are connected to the pipe. The radii of the tubes A, B and C at the junction are respectively 2 cm, 1 cm and 2 cm. It can be said that the

(a) Height of the liquid in the tube A is maximum

(b) Height of the liquid in the tubes A and B is the same

(c) Height of the liquid in all the three tubes is the same

(d) Height of the liquid in the tubes A and C is the same

A manometer connected to a closed tap reads $3.5\times {10}^5 \mathrm{N}/{\mathrm{m}}^2$. When the valve is opened, the reading of manometer falls to $3.0\times {10}^5 \mathrm{N}/{\mathrm{m}}^2$ , then velocity of flow of water is
(1) 100 m/s                                       

(2) 10 m/s

(3) 1 m/s                                           

(4) $10\sqrt{10}$ m/s

A cylinder of height 20 m is completely filled with water. The velocity of efflux of water (in m/s) through a small hole on the side wall of the cylinder near its bottom is
(1) 10                                       

(2) 20

(3) 25.5                                     

(4) 5

There is a hole in the bottom of tank having water. If total pressure at bottom is 3 atm ($1 \mathrm{atm}={10}^5 \mathrm{N}/{\mathrm{m}}^2$) then the velocity of water flowing from hole is 

(a) $\sqrt{400}$ m/s             (b) $\sqrt{600}$ m/s

(c) $\sqrt{60}$ m/s                (d) None of these

A cylindrical tank has a hole of $1 {\mathrm{cm}}^2$ in its bottom. If the water is allowed to flow into the tank from a tube above it at the rate of $70 {\mathrm{cm}}^3/\sec$. then the maximum height up to which water can rise in the tank is
(1) 2.5 cm                                             

(2) 5 cm

(3) 10 cm                                               

(4) 0.25 cm

A square plate of 0.1 m side moves parallel to a second plate with a velocity of 0.1 m/s, both plates being immersed in water. If the viscous force is 0.002 N and the coefficient of viscosity is 0.01 poise, distance between the plates in m is

(1) 0.1                             

(2) 0.05

(3) 0.005                         

(4) 0.0005