On electrolysing a solution of dilute H₂SO₄ between platinum electrodes, the gas evolved at the anode and cathode are respectively:

1. SO₂ and O₂

2. SO₃ and H₂

3. O₂ and H₂

4. H₂ and O₂

What mass of copper will be deposited by passing 2 faraday of electricity through a solution of Cu(II) salt?

1. 35.6 g

2. 63.5 g

3. 6.35 g

4. 3.56 g

In electrolysis of NaCl when Pt electrode is taken then H₂ is liberated at cathode while with Hg cathode it forms sodium amalgam because :

1. Hg is more inert than Pt

2. More voltage is required to reduce H⁺ at Hg than at Pt

3. Na is dissolved in Hg while it does not dissolve in Pt

4. Concentration of H⁺ ions is larger when Pt electrode is taken.

The same amount of electricity was passed through two cells containing molten Al₂O₃ and molten NaCl. If 1.8 g of Al were liberated in one cell, the amount of Na liberated in the other cell is:

1. 4.6 g

2. 2.3 g

3. 6.4 g

4. 3.2 g

If mercury is used as cathode in the electrolysis of aqueous NaCl solution, the ions discharged at cathode are:

1. H⁺

2. Na⁺

3. OH^-

4. Cl^-

A gas X at 1 atm is bubbled through a solution containing a mixture of 1MY^- and 1MZ^- at 25$°$C. If the reduction potential of Z > Y > X, then:

1. Y will oxidise X and not Z

2. Y will oxidise Z and not X

3. Y will oxidise both X and Z

4. Y will reduce both X and Z

The solution of CuSO₄ in which copper rod is immersed is diluted to 10 times, the reduction electrode potential:

1. increases by 0.030 V

2. decreases by 0.030 V

3. increases by 0.059 V

4. decreases by 0.059 V

A solution containing one mole per litre each of Cu(NO₃)₂, AgNO₃, Hg₂(NO₃)₂ and Mg(NO₃)₂ is being electrolyzed by using inert electrodes. The values of standard electrode potentials in volt (reduction potentials) are,

Ag⁺ /Ag = 0.80 V, ${\mathrm{Hg}}_2^{2+}$/2Hg = 0.79 V,

Cu²⁺/Cu = +0.34 V and Mg²⁺/Mg = -2.37 V

With increasing voltage, the sequence of deposition of metals on the cathode will be:

1. Ag, Hg, Cu, Mg

2. Mg, Cu, Hg, Ag

3. Ag, Hg, Cu

4. Cu, Hg, Ag

Which of the following aqueous solutions has the highest electrical conductivity?

1. 0.1 M Acetic acid

2. 0.1 M Chloroacetic acid

3. 0.1 M Fluoroacetic acid

4. 0.1 M Difluoroacetic acid

During an electrolysis experiment, if a 100 mA current is passed through a solution of AgNO₃ for 30 minutes, how many coulombs of electricity will be consumed?

1. 108 C

2. 18000 C

3. 180 C

4. 3000 C