Q. No.A particle of mass \(m\) moves in the XY plane with a velocity \(v\) along the straight line AB. If the angular momentum of the particle with respect to the origin \(O\) is \(L_A\) when it is at \(A\) and \(L_B\) when it is at \(B,\) then:
1.
\(L_A>L_B\)
2.
\(L_A=L_B\)
3.
the relationship between \(L_A\) and \(L_B\) depends upon the slope of the line \(AB.\)
4.
\(L_A<L_B\)
The moment of inertia of a uniform circular disc of radius \(R\) and mass \(M\) about an axis touching the disc at its diameter and normal to the disc is:
1.
2.
3.
4.
A solid cylinder of mass \(2~\text{kg}\) and radius \(4~\text{cm}\) is rotating about its axis at the rate of \(3~\text{rpm}.\) The torque required to stop after \(2\pi\) revolutions is:
1. \(2\times 10^6~\text{N-m}\)
2. \(2\times 10^{-6}~\text{N-m}\)
3. \(2\times 10^{-3}~\text{N-m}\)
4. \(12\times 10^{-4}~\text{N-m}\)
A disc of radius \(2~\text{m}\) and mass \(100~\text{kg}\) rolls on a horizontal floor. Its centre of mass has a speed of \(20~\text{cm/s}\). How much work is needed to stop it?
1. \(1~\text{J}\)
2. \(3~\text{J}\)
3. \(30~\text{J}\)
4. \(2~\text{J}\)
A wheel has an angular acceleration of \(3.0\) rad/s2 and an initial angular speed of \(2.0\) rad/s. In a time of \(2\) s, it has rotated through an angle (in radians) of:
| 1. | \(6\) | 2. | \(10\) |
| 3. | \(12\) | 4. | \(4\) |
The ratio of the radii of gyration of a circular disc to that of a circular ring, each of the same mass and radius, around their respective axes is:
| 1. | \(\sqrt{3}:\sqrt{2}\) | 2. | \(1:\sqrt{2}\) |
| 3. | \(\sqrt{2}:1\) | 4. | \(\sqrt{2}:\sqrt{3}\) |
If \(\vec F\) is the force acting on a particle having position vector \(\vec r\) and \(\vec \tau\) be the torque of this force about the origin, then:
| 1. | \(\vec r\cdot\vec \tau\neq0\text{ and }\vec F\cdot\vec \tau=0\) |
| 2. | \(\vec r\cdot\vec \tau>0\text{ and }\vec F\cdot\vec \tau<0\) |
| 3. | \(\vec r\cdot\vec \tau=0\text{ and }\vec F\cdot\vec \tau=0\) |
| 4. | \(\vec r\cdot\vec \tau=0\text{ and }\vec F\cdot\vec \tau\neq0\) |
Two particles that are initially at rest, move towards each other under the action of their mutual attraction. If their speeds are \(v\) and \(2v\) at any instant, then the speed of the centre of mass of the system will be:
1. \(2v\)
2. \(0\)
3. \(1.5v\)
4. \(v\)
\(\mathrm{ABC}\) is an equilateral triangle with \(O\) as its centre. \(F_1,\) \(F_2,\) and \(F_3\) represent three forces acting along the sides \({AB},\) \({BC}\) and \({AC}\) respectively. If the total torque about \(O\) is zero, then the magnitude of \(F_3\) is:
1. \(F_1+F_2\)
2. \(F_1-F_2\)
3. \(\frac{F_1+F_2}{2}\)
4. \(2F_1+F_2\)
A solid cylinder of mass \(3\) kg is rolling on a horizontal surface with a velocity of \(4\) ms-1. It collides with a horizontal spring of force constant \(200\) Nm-1. The maximum compression produced in the spring will be:
1. \(0.5\) m
2. \(0.6\) m
3. \(0.7\) m
4. \(0.2\) m
© 2025 GoodEd Technologies Pvt. Ltd.