A train is moving at a rate of 72 km/hr on a horizontal plane. If the earth's horizontal component of magnetic field is 0.345 A/m and the angle of dip is 30°, then the potential difference across the two ends of a compartment of length 1.7 m will be-
1.
2.
3.
4.
The magnetic flux through a coil varies with time as . The ratio of emf at t = 3s to t = 0s will be
1. 1 : 9
2. 1 : 6
3. 6 : 1
4. 9 : 1
A wire of fixed lengths is wound on a solenoid of length and radius r. Its self inductance is found to be L. Now if same wire is wound on a solenoid of length and radius r/2, then the self inductance will be –
1.
2.
3.
4.
PQ is an infinite current carrying conductor. AB and CD are smooth conducting rods on which a conductor EF moves with constant velocity v as shown. The force needed to maintain constant speed of EF is –
1.
2.
3.
4.
A 50 turns circular coil has a radius of 3 cms, it is kept in a magnetic field acting normal to the area of the coil. The magnetic field B increased from 0.10 tesla to 0.35 tesla in 2 milliseconds. The average induced emf in the coil is-
1. 1.77 volts
2. 17.7 volts
3. 177 volts
4. 0.177 volts
A semicircular wire of radius R is rotated with constant angular velocity about an axis passing through one end and perpendicular to the plane of the wire.
There is a uniform magnetic field of strength B. The induced emf between the ends is?
1.
2.
3. is variable
4. none of these
The inductance of a closed-packed coil of 400 turns is 8 mH. A current of 5 mA is passed through it. The magnetic flux through each turn of the coil is approximately-
1.
2.
3.
4.
The magnetic flux through each turn of a 100 turn coil is , where t is in second. The induced emf at t = 2 s is
1.
2.
3.
4.
An emf of 15 volt is applied in a circuit containing 5 henry inductance and 10 ohm resistance. The ratio of the currents at time t = and at t = 1 second is -
1.
2.
3.
4.
A copper rod of length 0.19 m is moving parallel to a long wire with a uniform velocity of 10 m/s. The long wire carries 5 ampere current and is perpendicular to the rod. The ends of the rod are at distances 0.01 m and 0.2 m from the wire. The emf induced in the rod will be-
1.
2.
3.
4.