An ideal ammeter (zero resistance) and an ideal voltmeter (infinite resistance) are connected as shown in Fig. 6.47. The ammeter and the voltmeter readings are :

(1) 6.25 A, 3.75 V

(2) 3.00 A, 5V

(3) 3.00 A, 3.75 V

(4) 6.00 A, 6.25 V

एक आदर्श ऐमीटर (शून्य प्रतिरोध) और एक आदर्श वोल्टमीटर (अनंत प्रतिरोध) आरेख 6.47 में दर्शाए गए अनुसार जुड़े है। ऐमीटर और वोल्टमीटर का पाठ्यांक ज्ञात कीजिए।

(1)6.25 A, 3.75 V

(2) 3.00 A, 5V

(3) 3.00 A, 3.75 V

(4) 6.00 A, 6.25 V

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

If VAB=4V in the given figure, then resistance X will be :

(1) 5 Ω

(2) 10 Ω

(3) 15 Ω

(4) 20 Ω

यदि दिए गए आरेख में, VAB=4V, तब प्रतिरोध X कितना होगा?

(1) 5 Ω

(2) 10 Ω

(3) 15 Ω

(4) 20 Ω

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

A 100 W bulb designed to operate on 100 V is to be connected across a 500 V source. Find the resistance to be put in series so that bulb consumes 100 W only.

(1) 100 Ω

(2) 500 Ω

(3) 400 Ω

(4) 300 Ω

100 V पर संचालित होने के लिए निर्मित 100 W के एक बल्ब को 500 V स्रोत से जोड़ा गया है। श्रेणीक्रम में कितना प्रतिरोध लगाया जाए, कि बल्ब केवल 100 W की खपत करे।

(1) 100 Ω

(2) 500 Ω

(3) 400 Ω

(4) 300 Ω

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

Figure 7.44 shows three similar lamps L1, L2 and L3 connected across a power supply. If the lamp L3 fuses, how will the light emitted by L1 and L2 change?

(1) no change

(2) brilliance of both L1 decreases and that of L2 increases

(3) brilliance of both L1 and L2 increases

(4) brilliance of both L1 and L2 decreases

आरेख 7.44 तीन समान लैंपों L1, L2  और  L3 को दर्शाता है, जो एक विद्युत आपूर्ति से जुड़े हुए है। यदि लैंप L3फ़्यूज़ हो जाता है, L1  और  L2 से प्रकाश कैसे उत्सर्जित होगा?

(1) अपरिवर्तित 

(2) L1 की चमक घटती है और जबकि L2 की बढ़ती है।

(3) L1  और  L2 दोनों की चमक बढ़ती है।

(4) L1  और  L2 दोनों की चमक घटती है।

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

An electric bulb rated for 500 W at 100 V is used in a circuit having a 200 V supply. The resistance R that must be put in series with the bulb, so that the bulb draws 500 W, is :

(1) 18 Ω

(2) 20Ω

(3) 40 Ω

(4) 700 Ω

100 V पर 500 W के लिए अंकित एक विद्युत बल्ब का उपयोग 200V आपूर्ति वाले परिपथ में किया जाता है। बल्ब के साथ श्रेणीक्रम में कितना प्रतिरोध R जोड़ा जाना चाहिए, कि बल्ब 500 W आरेखित करता है:

(1) 18 Ω

(2) 20Ω

(3) 40 Ω

(4) 700 Ω

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

In the Wheatstone's bridge shown, P = 2 Ω, Q = 3 Ω, R = 6 Ω and S = 8 Ω. In order to obtain balance, shunt resistance across 'S' must be [SCRA 1998]

(1) 2 Ω

(2) 3 Ω

(3) 6 Ω

(4) 8 Ω

दर्शाए गए व्हीटस्टोन सेतु में, P = 2 Ω, Q = 3 Ω, R = 6 Ω और S = 8 Ω है संतुलन प्राप्त करने के लिए, 'S' में शंट प्रतिरोध कितना होना चाहिए? [SCRA 1998]

(1) 2 Ω

(2) 3 Ω

(3) 6 Ω

(4) 8 Ω

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

A copper wire has a square cross-section, 2.0 mm on a side. It carries a current of 8 A and the density of free electrons is 8 × 1028 m–3. The drift speed of electrons is equal to 

(1) 0.156 × 10–3 m.s–1

(2) 0.156 × 10–2 m.s–1

(3) 3.12 × 10–3 m.s–1

(4) 3.12 × 10–2 m.s–1

एक तांबे के तार का अनुप्रस्थ-काट क्षेत्रफल 2.0mm भुजा का वर्ग  है। यह 8A धारा का वहन करता है और मुक्त इलेक्ट्रॉनों का घनत्व 8 × 1028 m–3 है। इलेक्ट्रॉनों का अपवाह वेग किसके बराबर है?

(1) 0.156 × 10–3 m.s–1

(2) 0.156 × 10–2 m.s–1

(3) 3.12 × 10–3 m.s–1

(4) 3.12 × 10–2 m.s–1

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

What is the current (i) in the circuit as shown in figure 

(1) 2 A

(2) 1.2 A

(3) 1 A

(4) 0.5 A

आरेख में दर्शाए गए परिपथ में धारा (i) का मान कितना है? 

(1) 2 A

(2) 1.2 A

(3) 1 A

(4) 0.5 A

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

Express which of the following setups can be used to verify Ohm’s law 

(1)  
(2)
(3)
(4)

ओम के नियम को सत्यापित करने के लिए निम्नलिखित में से किस व्यवस्था का उपयोग किया जा सकता है:

(1)  
(2)
(3)
(4)

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints

advertisementadvertisement

A potentiometer is an ideal device of measuring potential difference because

(1) It uses a sensitive galvanometer

(2) It does not disturb the potential difference it measures

(3) It is an elaborate arrangement

(4) It has a long wire hence heat developed is quickly radiated

विभवमापी, विभवांतर को मापने का एक आदर्श उपकरण है क्योंकि-

(1) यह सुग्राही धारामापी का उपयोग करता है।

(2) यह मापे गए विभवांतर को प्रभावित नहीं करता है।

(3) यह एक विस्तृत व्यवस्था है।

(4) इसमें लंबा तार होता है, जिससे ऊर्जा जल्दी विकरित होती है।

From NCERT

To unlock all the explanations of this course, you need to be enrolled.

Hints