Which equilibrium can be described as Lewis acid-base reaction but not Bronsted acid-base reaction?
1. H2O + CH3COOHH3O+ + CH3COO-
2. 2NH3 + H2SO4 +
3. NH3 + CH3COOH + CH3COO-
4. [Cu(H2O)4]2+ + 4NH3 [Cu(NH3)4]2+ + 4H2O
किस साम्यावस्था को लुईस अम्ल-क्षार अभिक्रिया के रूप में वर्णित किया जा सकता है लेकिन ब्रान्स्टेड अम्ल-क्षार अभिक्रिया में नहीं?
(1) H2O + CH3COOHH3O+ + CH3COO-
(2) 2NH3 + H2SO4 +
(3) NH3 + CH3COOH + CH3COO-
(4) [Cu(H)2O)4]2+ + 4NH3 [Cu(NH3)4]2+ + 4H2O
H2S gas when passed through a solution of cations containing HCl precipitates the cations of seccond group in qualitative analysis but not those belonging to the fourth group. It is because
1. presence of HCl decreases the sulphide ion concentration
2. presence of HCl increases the sulphide ion concentration
3. solubility product of group II sulphides is more than that of group IV sulphides
4. sulphides of group IV cations are unstable in HCl
H2S गैस जब HCl युक्त धनायनों के एक विलयन से गुजरती है, गुणात्मक विश्लेषण में दूसरे वर्ग के धनायनों को अवक्षेपित करती है, लेकिन चौथे वर्ग से संबंधित नहीं होता है। इसकी कारण यह है कि
(1) HCl की उपस्थिति सल्फाइड आयन सांद्रता को कम करती है
(2) HCl की उपस्थिति सल्फाइड आयन सांद्रता को बढ़ाती है
(3) वर्ग II सल्फाइड का विलेयता गुणनफल वर्ग IV सल्फाइड से अधिक है
(4) वर्ग IV धनायन के सल्फाइड HCl में अस्थायी हैं
Equilibrium constant for the given reaction is kc = 1020 at temperature 300 K,A(s) + 2B (aq.) 2C (s) + D (aq.)K = 1020 The equilibrium conc. of B starting with mixture of 1 mole of A and 1/3 mole/litre of B at 300 K is
(1)
(2)
(3)
(4)
300 K तापमान पर दी गई अभिक्रिया A (s) + 2B (aq) 2C (s) + D (aq) के लिए साम्यावस्था स्थिरांक Kc = 1020 है। 300 K पर A के 1 मोल और B के 1/3 मोल/लीटर मिश्रण के साथ शुरू होने वाले B का साम्यावस्था सांद्रता है:
(1)
(2)
(3)
(4)
Calculate the molar solubility of zinc tetrathiocyanato–N–mercurate (II) if its Ksp = 2.2 x 10–7.
(1) 0.00380
(2) 0.000469
(3) 0.0095
(4) 0.0183
जिंक टेट्राथायोसायनो-N-मर्क्यूरेट (II) की मोलर घुलनशीलता की गणना कीजिए यदि इसका Ksp = 2.2 x 10–7 है।
(1) 0.00380
(2) 0.000469
(3) 0.0095
(4) 0.0183
The indicator constant of phenolphthalein is approximately 10–10. A solution is prepared by adding 100.01c.c. of 0.01 N sodium hydroxide to 100.00 c.c. of 0.01N hydrochloric acid. If a few drops of phenolphthalein are now added, what fraction of the indicator is converted to its coloured form?
(1)
(2)
(3)
(4)
फीनॉल्फथैलिन का सूचक स्थिरांक लगभग 10–10 है। 100.01c.c के 0.01 N सोडियम हाइड्रॉक्साइड को 100.00 c.c. के 0.01N हाइड्रोक्लोरिक अम्ल में मिलाकर एक विलयन तैयार किया जाता है। यदि अब फीनॉल्फथैलिन की कुछ बूंदों को मिलाया जाता है, सूचक के किस अंश को उसके रंगीन रूप में परिवर्तित किया जाता है?
(1)
(2)
(3)
(4)
The reactions, PCl5 (g) PCl3(g) + Cl2(g) and COCl2(g) CO2(g) + Cl2(g) are simultaneously in equilibrium in an equilibrium box at constant volume. A few moles of CO(g) are later introduced into the vessel. After some time, the new equilibrium concentration of
(1) PCl5 will remain unchanged
(2) Cl2 will be greater
(3) PCl5 will become less
(4) PCl5 will become greater
अभिक्रियाएं, PCl5 (g) PCl3(g) + Cl2(g) और COCl2 (g) CO2(g) + Cl2(g) स्थिर आयतन में एक साम्यावस्था पात्र में साम्यावस्था में एक साथ हैं। CO(g) के कुछ मोल बाद में पात्र में मिलाए जाते हैं। कुछ समय बाद, नई साम्यावस्था सांद्रता होगी?
(1) PCl5 अपरिवर्तित रहेगा
(2) Cl2 अधिक होगा
(3) PCl5 कम हो जाएगा
(4) PCl5 अधिक हो जाएगा
In the Haber process for the industrial manufacture of ammonia involving the reaction, N2 + 3H2 2NH3 at 200 atm pressure in the presence of a catalyst, temperature of about 500°C. This is considered as optimum temperature for the process because
(1) yield is maximum at this temperature
(2) catalyst is active only at this temperature
(3) energy needed for the reaction is easily obtained at this temperature
(4) rate of the catalytic reaction is fast enough while the yield is also appreciable for this exothermic reaction at this temperature.
अमोनिया के औद्योगिक निर्माण के लिए हैबर प्रक्रम में 200 atm दाब पर उत्प्रेरक की उपस्थिति में, लगभग 500°C का तापमान पर शामिल अभिक्रिया N2 + 3H2 2NH3 है। इसे प्रक्रम के लिए इष्टतम तापमान माना जाता है क्योंकि
(1) इस तापमान पर उत्पादन अधिकतम होता है
(2) उत्प्रेरक केवल इसी तापमान पर सक्रिय होता है
(3) अभिक्रिया के लिए आवश्यक ऊर्जा इस तापमान पर आसानी से प्राप्त हो जाती है
(4) उत्प्रेरकी अभिक्रिया की दर काफी तेज है जबकि इस तापमान पर इस ऊष्माक्षेपी अभिक्रिया के लिए उत्पादन भी प्रशंसनीय है।
In which solvent, solubility of AgCl is maximum ?
1. 0.01 M NaCl
2. Pure Water
3. 0.01 M NH4OH
4. 0.05 M AgNO3
किस विलायक में, AgCl की घुलनशीलता अधिकतम है?
(1) 0.01 M NaCl
(2) शुद्ध जल
(3) 0.01 M NH4OH
(4) 0.05 M AgNO3
Which of the following oxides is not expected to react with sodium hydroxide?
1. B2O3
2. CaO
3. SiO2
4. BeO
निम्नलिखित में से किस ऑक्साइड से सोडियम हाइड्रॉक्साइड के साथ अभिक्रिया करने की उम्मीद नहीं की जाती है?
(1) B2O3
(2) CaO
(3) SiO2
(4) BeO
In which of the following equilibrium Kc and Kp are not equal?
1. 2NO(g) N2(g) + O2(g)
2. SO2(g) + NO2(g) SO3(g) + NO(g)
3. H2(g) + I2(g) 2HI(g)
4. 2C(s) + O2(g) 2CO2(g)
निम्नलिखित में से किसमें साम्य Kc और Kp समान नहीं हैं?
(1) 2NO(g)N2(g) + O2(g)
(2) SO2(g) + NO2(g) SO3(g) + NO(g)
(3) H2(g) + I2(g) 2HI(g)
(4) 2C (s) + O2(g) 2CO2(g)