The network shown in the figure is part of a complete circuit. If at a certain instant, the current \(I\) is \(5~\text{A}\) and it is decreasing at a rate of \(5\times 10^{3}~\text{A/s}\), then \(V_B-V_A\) is equal to: 

              

1. \(20~\text{V}\) 2. \(15~\text{V}\)
3. \(10~\text{V}\) 4. \(5~\text{V}\)

Subtopic:  Self - Inductance |
 58%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

The key \(K\) is inserted at time \(t=0\). The initial \((t=0)\) and final \(t\rightarrow \infty\) currents through the battery are:
                              

1. \(\frac{1}{15}~\text{A},~\frac{1}{10}~\text{A}\)
2. \(\frac{1}{10}~\text{A},~\frac{1}{15}~\text{A}\)
3. \(\frac{2}{15}~\text{A},~\frac{1}{10}~\text{A}\)
4. \(\frac{1}{15}~\text{A},~\frac{2}{25}~\text{A}\)

Subtopic:  LR circuit |
 71%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A solenoid has an inductance of 60 henry and a resistance of 30 ohms. If connected to a 100-volt battery, how long will it take for the current to reach e - 1e  63.2% of its final value?

1.  1 second

2.  2 seconds

3.  e seconds

4.  2e seconds

Subtopic:  Self - Inductance |
 67%
Please attempt this question first.
Hints

advertisementadvertisement

The adjoining figure shows two bulbs \(B_1\) and \(B_2\) resistor \(R\) and an inductor \(L\). When the switch \(S\) is turned off 

1. Both \(B_1\) and \(B_2\) die out promptly.
2. Both \(B_1\) and \(B_2\) die out with some delay.
3. \(B_1\) dies out promptly but \(B_2\) with some delay.
4.  \(B_2\) dies out promptly but \(B_1\) with some delay.
Subtopic:  Self - Inductance |
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

An inductance L and a resistance R are first connected to a battery. After some time the battery is disconnected but L and R remain connected in a closed circuit. Then the current reduces to 37% of its initial value in time ?

1. RL sec

2. RLsec

3. LRsec

4. 1LRsec

Subtopic:  LR circuit |
 78%
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

An e.m.f. of 15 volt is applied in a circuit containing 5 henry inductance and 10 ohm resistance. The ratio of the currents at time t = ∞ and at t = 1 second is 

1. e1/2e1/21

2. e2e21

3. 1 – e–1

4. e–1

Subtopic:  LR circuit |
 67%
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints

advertisementadvertisement

Two conducting circular loops of radii \(R_1\) and \(R_2\) are placed in the same plane with their centres coinciding. If \(R_1>>R_2\), the mutual inductance \(M\) between them will be directly proportional to:

1. \(\dfrac{R_1}{R_2}\) 2. \(\dfrac{R_2}{R_1}\)
3. \(\dfrac{R^2_1}{R_2}\) 4. \(\dfrac{R^2_2}{R_1}\)
Subtopic:  Mutual Inductance |
 64%
From NCERT
NEET - 2021
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
Links
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

A circular loop of radius R carrying current I lies in the x-y plane with its centre at the origin. The total magnetic flux through the x-y plane is 

1. Directly proportional to I

2. Directly proportional to R

3. Directly proportional to R2

4. Zero

Subtopic:  Magnetic Flux |
 54%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

Two circular coils can be arranged in any of the three situations shown in the figure. Their mutual inductance will be 

1. Maximum in situation (A)

2. Maximum in situation (B)

3. Maximum in situation (C)

4. The same in all situations

Subtopic:  Mutual Inductance |
 74%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch

advertisementadvertisement

A conductor ABOCD moves along its bisector with a velocity of 1 m/s through a perpendicular magnetic field of 1 wb/m2, as shown in fig. If all the four sides are of 1m length each, then the induced emf between points A and D is

1. 0

2. 1.41 volt

3. 0.71 volt

4. None of the above

Subtopic:  Motional emf |
 71%
From NCERT
To view explanation, please take trial in the course.
NEET 2025 - Target Batch
Hints
To view explanation, please take trial in the course.
NEET 2025 - Target Batch