A 220V input is supplied to a transformer.The output circuit draws a current of 2.0A at 440V. If the efficiency of the transformer is 80%, the current drawn by the primary windings of the transformer is
1. 3.6A 2. 2.8A
3. 2.5A 4. 5.0A
Power dissipated in an L-C-R series circuit connected to an AC source of emf is
(a)
(b)
(c)
(d)
A coil has resistance and inductive reactance at 50 Hz frequency. If an AC source of 200 V, 100 Hz, is connected across the coil, the current in the coil will be:
1.
2.
3.
4.
The rms value of potential difference V shown in the figure is
(1)
(2)
(3)
(4)
A transformer having efficiency of 90% is working on 200 V and 3 kW power supply. If the current in the secondary coil is 6A, the voltage across the secondary coil and the current in the primary coil respectively are
1. 300V,15A
2. 450V,15A
3. 450V,13.5A
4. 600V,15A
An inductor 20 mH, a capacitor 50μF, and a resistor 40Ω are connected in series across a source of emf V=10sin340t. The power loss in the AC circuit is:
1. 0.67 W
2. 0.78W
3. 0.89 W
4. 0.46 W
In the adjoining figure, the impedance of the circuit will be
1. 120 ohm
2. 50 ohm
3. 60 ohm
4. 90 ohm
1. | \(\frac{1}{100}~\text{sec}\) | 2. | \(\frac{1}{200}~\text{sec}\) |
3. | \(\frac{1}{300}~\text{sec}\) | 4. | \(\frac{1}{400}~\text{sec}\) |
1. \(a\)
2. \(b\)
3. \(c\)
4. \(d\)
An ac source of variable frequency f is connected to an LCR series circuit. Which one of the graphs in the figure represents the variation of the current I in the circuit with frequency f :
(1)
(2)
(3)
(4)