Q. No.In a forward biasing of the p-n junction:
1.
the positive terminal of the battery is connected to the p-side and the depletion region becomes thick.
2.
the negative terminal of the battery is connected to the n-side and the depletion region becomes thin.
3.
the positive terminal of the battery is connected to the n-side and the depletion region becomes thin.
4.
the negative terminal of the battery is connected to the p-side and the depletion region becomes thick.
| 1. | the positive terminal of the battery is connected to the p-side and the depletion region becomes thick. |
| 2. | the negative terminal of the battery is connected to the n-side and the depletion region becomes thin. |
| 3. | the positive terminal of the battery is connected to the n-side and the depletion region becomes thin. |
| 4. | the negative terminal of the battery is connected to the p-side and the depletion region becomes thick. |
A transistor is operated in a common emitter configuration at Vc =2 V such that a change in the base current from 100 to 300 produces a change in the collector current from 10 mA to 20mA. The current gain is:
1. 75
2. 100
3. 25
4. 50
Which one of the following statements is false?
| 1. | Pure Si doped with trivalent impurities gives a p-type semiconductor. |
| 2. | The majority of carriers in an n-type semiconductor are holes. |
| 3. | The minority carriers in a p-type semiconductor are electrons. |
| 4. | The resistance of intrinsic semiconductors decreases with an increase in temperature. |
The device that can act as a complete electronic circuit is:
1. Junction diode
2. Integrated circuit
3. Junction transistor
4. Zener diode
A common emitter amplifier has a voltage gain of 50, an input impedance of 100 Ω and an output impedance of 200 Ω. The power gain of the amplifier is:
1. 500
2. 1000
3. 1250
4. 50
To get an output Y = 1 from the circuit shown below, the input must be:
1. A=0 B=1 C=0
2. A=0 B=0 C=1
3. A=1 B=0 C=1
4. A=1 B=0 C=0
1. \(6000~\mathring{A}\)
2. \(4000\) nm
3. \(6000\) nm
4. \(4000~\mathring{A}\)
The symbolic representation of four logic gates is as shown:
| (i) |  |
(ii) |  |
| (ii) |  |
(iv) |  |
The logic symbols for OR, NOT, and NAND gates are respectively:
1. (iii), (iv), (ii)
2. (iv), (i), (iii)
3. (iv), (ii), (i)
4. (i), (iii), (iv)
The voltage gain of an amplifier with 9% negative feedback is 10. The voltage gain without feedback will be:
1. 90
2. 10
3. 1.25
4. 100
A p-n photodiode is made of a material with a bandgap of 2.0 eV. The minimum frequency of the radiation that can be absorbed by the material is nearly:
1.
2.
3.
4.
© 2024 GoodEd Technologies Pvt. Ltd.