In an adiabatic process, work done versus change of
temperature $∆$T is

The volume and temperature graph is given in the figure below. If pressures for the two processes are different, then which one,  of the following, is true?

n moles of an ideal gas is heated at constant pressure
from 50°C to 100°C, the increase in internal energy
of the gas is $\left(\frac{{\mathrm{C}}_{\mathrm{p}}}{{\mathrm{C}}_{\mathrm{v}}}=\mathrm{\gamma } \mathrm{and} \mathrm{R}=\mathrm{gas} \mathrm{constant}\right)$

1. $\frac{50 \mathrm{nR}}{\mathrm{\gamma }-1}$

2. $\frac{100 \mathrm{nR}}{\mathrm{\gamma }-1}$

3. $\frac{50 \mathrm{n\gamma R}}{\mathrm{\gamma }-1}$

4. $\frac{25 \mathrm{n\gamma R}}{\mathrm{\gamma }-1}$

One mole of diatomic ideal gas undergoes a cyclic process ABC as shown in the figure. The process of BC is adiabatic. The temperature at A, B and C are 400 K, 800 K, and 600 K respectively. Choose the correct statement:

1. The change in internal energy in the process AB is - 350R.

2. The change in internal energy in the process BC is - 500R.

3. The change in internal energy in the whole cyclic process is 250R.

4. The change in internal energy in the process CA is 700R. 

Which of the following shows the correct relationship between the pressure 'P' and density $\rho$ of an ideal gas at constant temperature?

(1) 

(2)

(3) 

(4)

During an adiabatic compression, 830 J of work is done on 2 moles of a diatomic ideal gas to reduce its volume by 50%. The change in its temperature is nearly:

$(\mathrm{R}=8.3 {\mathrm{JK}}^{-1} {\mathrm{mol}}^{-1})$

1. 40 K

2. 33 K

3. 20 K

4. 14 K

A Carnot engine absorbs 1000 J of heat energy from a reservoir at $127°\mathrm{C}$ and rejects 600 J of heat energy during each cycle. The efficiency of the engine and temperature of the sink will be:

1. $20\% \mathrm{and}-43°\mathrm{C}$

2. $40\% \mathrm{and}-33°\mathrm{C}$

3. $50\% \mathrm{and}-20°\mathrm{C}$

4. $70\% \mathrm{and}-10°\mathrm{C}$

One mole of an ideal monoatomic gas is compressed isothermally in a rigid vessel to double its pressure at room temperature, $27°C$.The work done on the gas will be:

(1) 300R

(2) 300R$\ln \left(6\right)$ 

(3) 300R$\ln \left(2\right)$

(4) 300R$\ln \left(7\right)$

Consider a spherical shell of radius R and temperature T. The black body radiation inside it can be considered as an ideal gas of photons with internal energy per unit volume$\mathrm{u}=\frac{\mathrm{U}}{\mathrm{V}}\propto {\mathrm{T}}^4 \mathrm{and} \mathrm{pressure} \mathrm{P}=\frac{1}{3}\left(\frac{\mathrm{U}}{\mathrm{V}}\right)$. If the shell now undergoes an adiabatic expansion, the relation between T and R is:

P-V curves for isothermal and adiabatic
processes of an ideal gas1. $\mathrm{T}\propto {\mathrm{e}}^{-3\mathrm{R}}$

2. $\mathrm{T}\propto \raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{$\mathrm{R}$}\right.$

3. $\mathrm{T}\propto \raisebox{1ex}{$1$}\!\left/ \!\raisebox{-1ex}{${\mathrm{R}}^3$}\right.$

4. $\mathrm{T}\propto {\mathrm{e}}^{-\mathrm{R}}$

An ideal gas going through the reversible cycle $\mathrm{a}\to \mathrm{b}\to \mathrm{c}\to \mathrm{d}$, has the V-T diagram as shown below in the figure. Process $\mathrm{d}\to \mathrm{a} \mathrm{and} \mathrm{b}\to \mathrm{c}$ are adiabatic.

The corresponding P-V diagram for the process is (all figures are schematic and not drawn to scale):

1. 

2. 

3. 

4.