A motorcycle is going on an overbridge of radius R. The driver maintains a constant speed. As the motorcycle is ascending on the overbridge, the normal force on it:
1. Increases
2. decreases
3. remains the same
4. fluctuates erratically
R त्रिज्या के एक ओवरब्रिज पर एक मोटरसाइकिल जा रही है। चालक एक नियत चाल बनाए रखता है। चूँकि मोटरसाइकिल ओवरब्रिज पर चढ़ रही है, तो उस पर अभिलंबवत बल है:
1. बढ़ता है
2. घटता है
3. समान बना रहता है
4. त्रुटिपूर्ण रूप से घटता बढ़ता है
When two surfaces are coated with a lubricant, then they
(1) Stick to each other
(2) Slide upon each other
(3) Roll upon each other
(4) None of these
जब दो सतहों को एक स्नेहक से लेपित किया जाता है, तब वे
(1) एक दूसरे से चिपकती हैं
(2) एक दूसरे पर फिसलती हैं
(3) एक दूसरे पर घूर्णन करती हैं
(4) इनमें से कोई नहीं
A constant force acts on a body of mass 0.9 kg at rest for 10s. If the body moves a distance of 250 m, the magnitude of the force is
(1) 3 N
(2) 3.5 N
(3) 4.0 N
(4) 4.5 N
विरामावस्था में 10s के लिए 0.9 kg द्रव्यमान की एक वस्तु पर एक अचर बल कार्य करता है। यदि वस्तु 250m की दूरी तक जाती है, तो बल का परिमाण है-
(1) 3 N
(2) 3.5 N
(3) 4.0 N
(4) 4.5 N
A body takes just twice the time as long to slide down a plane inclined at 30o to the horizontal as if the plane were frictionless. The coefficient of friction between the body and the plane is
(1)
(2)
(3)
(4)
क्षैतिज से 30o पर आनत तल से एक वस्तु को फिसलने में उस समय का दुगना समय लगता है जितना समय तब लगता है जब तल घर्षण रहित था। वस्तु और तल के बीच घर्षण गुणांक है-
(1)
(2)
(3)
(4)
A block is kept on an inclined plane of inclination θ of length l. The velocity of particle at the bottom of inclined is (the coefficient of friction is μ)
(1)
(2)
(3)
(4)
θ झुकाव वाले l लंबाई के एक आनत तल पर एक गुटका रखा हुआ है। आनत तल पर कण का वेग है (घर्षण गुणांक μ है)
(1)
(2)
(3)
(4)
Two masses M and m are connected by a weightless string. They are pulled by a force F on a frictionless horizontal surface. The acceleration of mass m is
(1)
(2)
(3)
(4)
दो द्रव्यमान M और m एक भारहीन डोरी द्वारा जुड़े हुए हैं। एक घर्षण रहित क्षैतिज सतह पर उन्हें एक बल F द्वारा खींचा जाता है।। द्रव्यमान m का त्वरण है-
(1)
(2)
(3)
(4)
The maximum speed that can be achieved without skidding by a car on a circular unbanked road of radius R and coefficient of static friction μ, is
(1)
(2)
(3)
(4)
एक कार द्वारा अधिकतम चाल जो कि R त्रिज्या की एक वृत्तीय समतल सड़क पर बिना फिसले प्राप्त की जा सकती है और स्थैतिक घर्षण गुणांक μ है, है-
(1)
(2)
(3)
(4)
Two masses M and M/2 are joint together by means of a light inextensible string passes over a frictionless pulley as shown in figure. When bigger mass is released the small one will ascend with an acceleration of
(1) g/3
(2) 3g/2
(3) g/2
(4) g
दो द्रव्यमान M और M/2 संयुक्त रूप से दिखाए गए एक हल्की अवितान्य डोरी के माध्यम से एक घर्षण रहित घिरनी पर गुजरते हैं जैसा कि चित्र में दिखाया गया है। जब बड़े द्रव्यमान को मुक्त किया जाता है तो छोटा द्रव्यमान किस त्वरण के साथ चढ़ेगा?
A ball of mass 150g starts moving with an acceleration of 20 m/s2. When hit by a force, which acts on it for 0.1 sec. The impulsive force is
(1) 0.5 N-s
(2) 0.1 N-s
(3) 0.3 N-s
(4) 1.2 N-s
द्रव्यमान 150g की एक गेंद 20 m/s2 के त्वरण से गति करना आरंभ करती है। जब इस पर बल लगता है, जो कि 0.1 सेकंड के लिए उस पर कार्य करता है, आवेग बल है-
(1) 0.5 N-s
(2) 0.1 N-s
(3) 0.3 N-s
(4) 1.2 N-s
A ball of mass 0.5 kg moving with a velocity of 2 m/sec strikes a wall normally and bounces back with the same speed. If the time of contact between the ball and the wall is one millisecond, the average force exerted by the wall on the ball is
(1) 2000 N
(2) 1000 N
(3) 5000 N
(4) 125 N
द्रव्यमान 0.5 kg की एक गेंद 2 m/sec के वेग से गति करते हुए अभिलंबवत रूप से दीवार पर टकराती है और उसी चाल से वापस आती है। यदि गेंद और दीवार के बीच संपर्क का समय एक मिलीसेकंड है, तो गेंद पर दीवार द्वारा लगाया गया औसत बल है-
(1) 2000N
(2) 1000N
(3) 5000N
(4) 125 N