In a PN-junction diode not connected to any circuit
(a) The potential is the same everywhere
(b) The P-type is at higher potential than the N-type side
(c) There is an electric field at the junction directed from the N- type side to the P- type side
(d) There is an electric field at the junction directed from the P-type side to the N-type side
यदि PN-संधि डायोड किसी भी परिपथ से जुड़ा नहीं है, तब:
(a) सभी जगह विभव समान होता है।
(b) N-प्रकार सिरे की तुलना में P-प्रकार उच्च विभव पर है।
(c) संधि पर विद्युत क्षेत्र N-प्रकार सिरे से P-प्रकार सिरे की ओर निर्देशित है।
(d) संधि पर विद्युत क्षेत्र P-प्रकार सिरे से N-प्रकार सिरे की ओर निर्देशित है।
Which of the following statements is not true
(a) The resistance of intrinsic semiconductors decrease with increase of temperature
(b) Doping pure with trivalent impurities give P-type semiconductors
(c) The majority carriers in N-type semiconductors are holes
(d) A PN-junction can act as a semiconductor diode
निम्नलिखित कथनों में से कौन सा सत्य नहीं है?
(a) आंतरिक अर्धचालकों का प्रतिरोध तापमान बढ़ने के साथ घटता है।
(b) त्रिसंयोजक अशुद्धियों के साथ शुद्ध अपमिश्रित p-प्रकार अर्धचालक बनाता है।
(c) N-प्रकार के अर्धचालक में बहुसंख्यक वाहक कोटर होते हैं।
(d) PN-संधि अर्धचालक डायोड के रूप में कार्य कर सकता है।
A semiconductor X is made by doping a germanium crystal with arsenic (Z = 33). A second semiconductor Y is made by doping germanium with indium (Z = 49). The two are joined end to end and connected to a battery as shown. Which of the following statements is correct
(a) X is P-type, Y is N-type and the junction is forward biased
(b) X is N-type, Y is P-type and the junction is forward biased
(c) X is P-type, Y is N-type and the junction is reverse biased
(d) X is N-type, Y is P-type and the junction is reverse biased
अर्धचालक X का निर्माण आर्सेनिक (Z = 33) के साथ जर्मेनियम क्रिस्टल को अपमिश्रित करके किया जाता है। एक दूसरे अर्धचालक Y का निर्माण इंडियम (Z = 49) के साथ जर्मेनियम को अपमिश्रित करके किया जाता है। दोनों को दर्शाए गए अनुसार एक सिरे से दूसरे सिरे तक और बैटरी से जोड़ा गया हैं। निम्नलिखित कथनों में से कौन-सा सही है?
(a) X, P-प्रकार का है, Y, N-प्रकार का है और संधि अग्र अभिनत है।
(b) X, N-प्रकार का है, Y, P-प्रकार का है और संधि अग्र अभिनत है।
(c) X, P-प्रकार का है, Y, N-प्रकार का है और संधि उत्क्रमित अभिनत है।
(d) X, N-प्रकार का है, Y, P-प्रकार का है और संधि उत्क्रमित अभिनत है।
A diode having potential difference 0.5 V across its junction which does not depend on current, is connected in series with resistance of 20 across source. If 0.1 A passes through resistance then what is the voltage of the source
(a) 1.5 V (b) 2.0 V
(c) 2.5 V (d) 5 V
एक डायोड जिसकी संधि पर विभवांतर 0.5 V है जो धारा पर निर्भर नहीं करता है, 20 के प्रतिरोध के साथ स्त्रोत से श्रेणीक्रम में जुड़ा हुआ है। यदि 0.1 A प्रतिरोध से गुजरती है तो स्रोत का वोल्टेज क्या है?
(a) 1.5 V (b) 2.0 V
(c) 2.5 V (d) 5 V
In an NPN transistor circuit, the collector current is 10 mA. If 90% of the electrons emitted reach the collector, the emitter current () and base current () are given by
(a) = –1 mA, = 9 mA
(b) = 9 mA, = – 1 mA
(c) = 1 mA, = 11 mA
(d) = 11 mA, = 1 mA
एक NPN ट्रांजिस्टर परिपथ में, संग्राहक धारा 10 mA है। यदि उत्सर्जित इलेक्ट्रॉनों का 90% संग्राहक तक पहुंच जाता है, तो उत्सर्जक धारा () और आधार धारा () निम्न द्वारा दी गई हैं:
(a) = –1 mA, = 9 mA
(b) = 9mA , = – 1 mA
(c) = 1mA ,= 11mA
(d) = 11mA , = 1 mA
The relation between and parameters of current gains for a transistors is given by
(a) (b)
(c) (d)
एक ट्रांजिस्टर के लिए और के बीच का संबंध किस प्रतिबन्ध द्वारा दिया जाता है?
(a) (b)
(c) (d)
A truth table is given below. Which of the following has this type of truth table
A 0 1 0 1
B 0 0 1 1
y 1 0 0 0
(1) XOR gate
(2) NOR gate
(3) AND gate
(4) OR gate
निम्नवत एक सत्यता सारणी दी गई है। निम्न में से किस में इस प्रकार की सत्यता सारणी है?
A 0 1 0 1
B 0 0 1 1
Y 1 0 0 0
(1) XOR गेट
(2) NOR गेट
(3) AND गेट
(4) OR गेट
In an insulator, the forbidden energy gap between the valence band and conduction band is of the order of
(1) 1 MeV
(2) 0.1 MeV
(3) 1 eV
(4) 15 eV
विद्युतरोधी में, संयोजी बैंड और चालन बैंड के बीच वर्जित ऊर्जा अंतराल किस कोटि का है?
(1) 1 MeV
(2) 0.1 MeV
(3) 1 eV
(4) 15 eV
To obtain a P-type Si semiconductor, we need to dope pure Si with
(1) Aluminium
(2) Phosphorous
(3) Oxygen
(4) Germanium
P-प्रकार Si अर्धचालक प्राप्त करने के लिए, हमें शुद्ध Si को किसके साथ अपमिश्रित करने की आवश्यकता होती है?
(1) ऐलुमिनियम
(2) फॉस्फोरस
(3) ऑक्सीजन
(4) जर्मेनियम