The second law of thermodynamics states that in a cyclic process
(1) Work can not be converted into heat
(2) Heat can not be converted into work
(3) Work can not be completely converted into heat
(4) Heat can not be completely converted into work
किसी ऊष्मागतिकी निकाय के लिए निम्नलिखित में से कौन सा कथन सही है?
(1) सभी प्रक्रमों में आंतरिक ऊर्जा परिवर्तित होती है
(2) आंतरिक ऊर्जा और एन्ट्रॉपी अवस्था फलन हैं
(3) एन्ट्रापी में परिवर्तन कभी भी शून्य नहीं हो सकता है
(4) रुद्धोष्म प्रक्रिया में किया गया कार्य हमेशा शून्य होता है
Two identical samples of a gas are allowed to expand (i) isothermally (ii) adiabatically. Work done is
1. More in the isothermal process
2. More in the adiabatic process
3. Neither of them
4. Equal in both processes
एक गैस के दो समान नमूने क्रमश: (i) समतापीय (ii) रुद्धोष्म रूप से प्रसारित होते हैं। किया गया कार्य है:
1. समतापीय प्रक्रिया में अधिक
2. रुद्धोष्म प्रक्रिया में अधिक
3. उनमें से कोई नहीं
4. दोनों प्रक्रियाओं में बराबर
A gas is compressed isothermally to half its initial volume. The same gas is compressed separately through an adiabatic process until its volume is again reduced to half .Then -
(a) compressing the gas through adiabatic process will require more work to be done
(b) compressing the gas isothermally or adiabatically will require the same amount work
(c) which of the case (whether compression through isothermal or through adiabatic process) requires more work will depend upon the atomicity of the gas
(d) compressing the gas isothermally will require more work to be done
एक गैस को समतापीय रूप से इसके प्रारंभिक आयतन का आधा संपीडित किया जाता है। उसी गैस को अलग एक रुद्धोष्म प्रक्रिया के माध्यम से संपीडित किया जाता है जब तक कि इसका आयतन फिर से आधा नहीं हो जाता है। तब -
(a) रुद्धोष्म प्रक्रिया के माध्यम से गैस को संपीडित करने के लिए अधिक कार्य करने की आवश्यकता होगी
(b) गैस को समतापीय रूप से या रुद्धोष्म रूप से संपीडित करने के लिए समान मात्रा में कार्य करना होगा
(c) कौन सी स्थिति में (समतापीय प्रक्रिया के माध्यम से या रुद्धोष्म प्रक्रिया के माध्यम से) अधिक कार्य करने की आवश्यकता है यह गैस की परमाण्विकता पर निर्भर करेगा
(d) गैस को समतापीय रूप से संपीडित करने के लिए अधिक कार्य करना होगा
The pressure and density of a diatomic gas change adiabatically from (P, d) to (P', d'). If , then should be
(1) 1/128
(2) 32
(3) 128
(4) None of the above
एक द्विपरमाणुक गैस का दाब और घनत्व रुद्धोष्म ढंग से (P, d) से (P', d') तक परिवर्तित होता है। यदि , तब का मान होगा
(1) 1/128
(2) 32
(3) 128
(4) उपरोक्त में से कोई नहीं
Which of the following graphs correctly represents the variation of with P for an ideal gas at constant temperature ?
(1)
(2)
(3)
(4)
निम्नलिखित में से कौन सा आरेख सही प्रकार से के परिवर्तन को नियत तापमान पर एक आदर्श गैस के लिए P के साथ प्रदर्शित करता है?
(1)
(2)
(3)
(4)
If the volume of the given mass of a gas is increased four times and the temperature is raised from 27°C to 127°C. The isothermal elasticity will become
(a) 4 times (b) 1/4 times
(c) 3 times (d) 1/3 times
यदि दिए गए द्रव्यमान पर किसी गैस के आयतन को चार गुना बढ़ा दिया जाता है और उसके तापमान को 27°C से 127°C तक बढ़ा दिया जाता है। समतापीय प्रत्यास्थता हो जाएगी
(a) 4 गुना (b) 1/4 गुना
(c) 3 गुना (d) 1/3 गुना
A reversible engine converts one-sixth of the heat input into work. When the temperature of the sink is reduced by 62°C, the efficiency of the engine is doubled. The temperatures of the source and sink are -
(1) 80°C, 37°C
(2) 95°C, 28°C
(3) 90°C, 37°C
(4) 99°C, 37°C
उत्क्रमणीय इंजन निवेशित ऊष्मा के 1/6 भाग को कार्य में परिवर्तित कर देता हैं। यदि अभिगम के तापमान को 62°C कम कर दिया जाता है तो इंजन की दक्षता दोगुनी हो जाती है। स्रोत तथा अभिगम के तापमान हैं -
(1) 80°C, 37°C
(2) 95°C, 28°C
(3) 90°C, 37°C
(4) 99°C, 37°C
A sample of ideal monoatomic gas is taken round the cycle CBAC as shown in the figure. The work done during the cycle is
(1) Zero
(2) 3 PV
(3) 6 PV
(4) 9PV
जैसा कि आकृति में दिखाया गया है कि आदर्श एकपरमाणुक गैस के एक नमूने को चक्रीय प्रक्रम में पथ CBAC से गुज़ारा जाता है, चक्रीय प्रक्रम के दौरान किया गया कार्य है
(1) शून्य
(2) 3 PV
(3) 6 PV
(4) 9PV
A thermodynamic system is taken through the cycle PQRSP process. The net work done by the system is -
(1) 20 J
(2) – 20 J
(3) 400 J
(4) – 374 J
एक ऊष्मागतिकी निकाय को नीचे दिए गये चक्रीय प्रक्रम के पथ PQRSP के माध्यम से ले जाया जाता है। तो निकाय द्वारा किया गया परिणामी कार्य का मान क्या होगा-
(1) 20 J
(2) – 20 J
(3) 400 J
(4) – 374 J