Copper of fixed volume V is drawn into wire of length l. When this wire is subjected to a constant force F, the extension produced in the wire is Δl. Which of the following graphs is a straight line?
(a)Δl versues 1/l
(b)Δl versus l2
(c)Δl versus 1/l2
(d) Δl versus l
नियत आयतन V के कॉपर को लंबाई l के तार में खींचा जाता है। जब इस तार पर एक नियत बल F लगाया जाता है, तो तार में उत्पन्न प्रसार Δl है। निम्नलिखित में से कौन सा ग्राफ एक सरल रेखा है?
(a) Δl बनाम 1/l
(b) Δl बनाम l2
(c) Δl बनाम 1/l2
(d) Δl बनाम l
If the potential energy of a spring is V on stretching it by 2 cm, then its potential energy when it is stretched by 10 cm will be
(a) V/25 (b) 5V
(c) V/5 (d) 25V
यदि एक स्प्रिंग को 2 cm खींचने पर स्प्रिंग में स्थितिज ऊर्जा V है, तो इसे 10 cm तक खींचने पर इसकी स्थितिज ऊर्जा होगी:
(a) V/25 (b) 5V
(c) V/5 (d) 25V
The area of cross-section of a wire of length 1.1 metre is 1It is loaded with 1 kg. If Young's modulus of copper is then the increase in length will be (If )
(a) 0.01 mm (b) 0.075 mm
(c) 0.1 mm (d) 0.15 mm
1.1 मीटर लंबाई के तार का अनुप्रस्थ काट क्षेत्रफल 1 है। यह 1kg से भारित किया जाता है। यदि तांबे का यंग मापांक तब लंबाई में वृद्धि कितनी होगी? (यदि )
(a) 0.01 mm (b) 0.075 mm
(c) 0.1 mm (d) 0.15 mm
In the following questions, a statement of assertion (A) is followed by a statement of the reason (R)
(1) If both Assertion & Reason are true and the reason is the correct explanation of the assertion, then mark (1).
(2) If both Assertion & Reason are true but the reason is not the correct explanation of the assertion, then mark (2).
(3) If Assertion is a true statement but Reason is false, then mark (3).
(4) If both Assertion and Reason are false statements, then mark (4).
A: Air is more elastic than iron.
R: Elasticity is directly proportional to Bulk modulus and the Bulk modulus of air is more than that of steel
निम्नलिखित प्रश्नों में, अभिकथन (A) का प्रकथन कारण (R) के प्रकथन का अनुपालन करता है।
(1) यदि अभिकथन और कारण दोनों सत्य हैं और कारण अभिकथन का सही व्याख्या है, तब (1) चुनिए
(2) यदि अभिकथन और कारण दोनों सत्य हैं, परन्तु कारण अभिकथन की सही व्याख्या नहीं है, तब (2) चुनिए
(3) यदि अभिकथन सही प्रकथन है, परन्तु कारण असत्य है, तब (3) चुनिए
(4) यदि अभिकथन और कारण दोनों असत्य प्रकथन हैं, तब (4) चुनिए
A: लोहे की तुलना में वायु अधिक प्रत्यास्थ है।
R: प्रत्यास्थता, आयतन प्रत्यास्थता गुणांक के अनुक्रमानुपाती होती है और वायु का आयतन प्रत्यास्थता गुणांक स्टील से अधिक होता है।
In the following questions, a statement of assertion (A) is followed by a statement of the reason (R).
(1) If both Assertion & Reason are true and the reason is the correct explanation of the assertion, then mark (1).
(2) If both Assertion & Reason are true but the reason is not the correct explanation of the assertion, then mark (2).
(3) If Assertion is a true statement but Reason is false, then mark (3).
(4) If both Assertion and Reason are false statements, then mark (4).
A: Steel is more elastic than rubber.
R: Deformation in steel is less than rubber for equal forces.
निम्नलिखित प्रश्नों में, कारण (R) का प्रकथन, अभिकथन (A) के प्रकथन का अनुपालन करता है।
(1) यदि अभिकथन और कारण दोनों सत्य हैं और कारण अभिकथन की सही व्याख्या है, तब (1) चुनिए
(2) यदि अभिकथन और कारण दोनों सत्य हैं, परन्तु कारण अभिकथन की सही व्याख्या नहीं है, तब (2) चुनिए
(3) यदि अभिकथन सत्य प्रकथन है, परन्तु कारण असत्य है, तब (3) चुनिए
(4) यदि अभिकथन और कारण दोनों असत्य प्रकथन हैं, तब (4) चुनिए
A: स्टील, रबड़ की तुलना में अधिक प्रत्यास्थ है।
R: समान बल के लिए स्टील में विरूपण रबड़ से कम होता है।
For two different material wires of the same dimensions, Young's modulus is:
(1) Higher for A
(2) Higher for B
(3) Same for both
(4) Infinite for both
समान विमाओं के दो भिन्न पदार्थों के तारों के लिए, यंग मापांक है
(1) A के लिए उच्चतम
(2) B के लिए उच्चतम
(3) दोनों के लिए समान
(4) दोनों के लिए अनंत
The bulk modulus of a rubber ball is . To what depth below the surface of the sea, should the ball be taken so as to decrease its volume by 0.1%?
(1) 1 m
(2) 10 m
(3) 90 m
(4) 1 km
रबर की एक गेंद का आयतन मापांक है। समुद्र की सतह के नीचे कितनी गहराई तक गेंद को ले जाना चाहिए ताकि इसका आयतन 0.1% से कम हो जाए?
(1) 1 m
(2) 10 m
(3) 90 m
(4) 1 km
An elongation of 0.1% in a wire of cross-sectional area causes tension of 100 N. The Young's modulus is:
(1)
(2)
(3)
(4)
अनुप्रस्थ काट क्षेत्रफल वाले एक तार में 0.1% का प्रसार 100 N के तनाव के कारण होता है। यंग मापांक है:
(1)
(2)
(3)
(4)
A wire of length L and area of cross-section A is made of material of Young's modulus Y. If its length is stretched by x, the work done is:
1.
2.
3.
4.
L लंबाई और A अनुप्रस्थ काट क्षेत्रफल का तार Y यंग मापांक के पदार्थ का बना हुआ है। यदि इसकी लंबाई x से प्रसारित की जाती है, तो किया गया कार्य है:
1.
2.
3.
4.
Elongation of a steel wire of length L and radius r under its own weight is x. Elongation of another steel wire of length L and radius 2r under its own weight is:
(1) x
(2)
(3) 4x
(4) 2x
L लंबाई और r त्रिज्या के स्टील के तार का इसके भार के अंतर्गत प्रसार x है। L लंबाई और 2r त्रिज्या के एक दूसरे स्टील के तार का इसके भार के अंतर्गत प्रसार है:
(1) x
(2)
(3) 4x
(4) 2x