The figure below shows currents in a part of electric circuit. The current i is
1. 1.7 amp
2. 3.7 amp
3. 1.3 amp
4. 1 amp
In the circuit shown, A and V are ideal ammeter and voltmeter respectively. Reading of the voltmeter will be
1. 2 V
2. 1 V
3. 0.5 V
4. Zero
The terminal potential difference of a cell when short-circuited is (E = E.M.F. of the cell)
1. E
2. E/2
3. Zero
4. E/3
The potential difference in open circuit for a cell is 2.2 volts. When a 4-ohm resistor is connected between its two electrodes the potential difference becomes 2 volts. The internal resistance of the cell will be :
1. 1 ohm
2. 0.2 ohm
3. 2.5 ohm
4. 0.4 ohm
A cell whose e.m.f. is 2 V and internal resistance is 0.1 Ω, is connected with a resistance of 3.9 Ω. The voltage across the cell terminal will be :
1. 0.50 V
2. 1.90 V
3. 1.95 V
4. 2.00 V
n identical cells each of e.m.f. E and internal resistance r are connected in series. An external resistance R is connected in series to this combination. The current through R is
1.
2.
3.
4.
A cell of internal resistance r is connected to an external resistance R. The current will be maximum in R, if :
1. R = r
2. R < r
3. R > r
4. None of these
Two identical cells send the same current in 2 Ω resistance, whether connected in series or in parallel. The internal resistance of the cell should be
1. 1 Ω
2. 2 Ω
3.
4. 2.5 Ω
The internal resistances of the two cells shown are 0.1 Ω and 0.3 Ω. If R = 0.2 Ω, the potential difference across the cell :
1. B will be zero
2. A will be zero
3. A and B will be 2V
4. A will be > 2V and B will be < 2V
The figure shows a network of currents. The magnitude of currents is shown here. The current i will be
1. 3 A
2. 13 A
3. 23 A
4. – 3 A