If the units of force and length, are increased by four times, then the unit of energy increases by:
1. \(16\) times
2. \(8\) times
3. \(2\) times
4. \(4\) times

The dimension of $({\mathrm{\mu }}_0{\mathrm{\epsilon }}_0{)}^{-1/2}$ are 

(1) $\left[{\mathrm{L}}^{-1} \mathrm{T}\right]$

(2) $\left[{\mathrm{LT}}^{-1}\right]$

(3) $\left[{\mathrm{L}}^{-1/2}{\mathrm{T}}^{1/2}\right]$

(4) $\left[{\mathrm{L}}^{1/2}{\mathrm{T}}^{-1/2}\right]$

The density of material in the CGS system of units is $4g/c{m}^3.$ In a system of units in which unit of length is 10cm and unit of mass is 100g when the value of density of material in this system will be:

(1) 0.4

(2) 40

(3) 400

(4) 0.04 

A student measures the distance traversed in free fall of a body, initially at rest in a given time. He uses this data to estimate g, the acceleration due to gravity. If the maximum percentage errors in measurement of the distance and the time are ${\mathrm{e}}_1$ and ${\mathrm{e}}_2$ respectively, the percentage error in the estimation of g is 

1. ${\mathrm{e}}_2-{\mathrm{e}}_1$

2. ${\mathrm{e}}_1+2{\mathrm{e}}_2$

3. ${\mathrm{e}}_1+{\mathrm{e}}_2$ 

4. ${\mathrm{e}}_1-2{\mathrm{e}}_2$

If the dimension of a physical quantity are given by ${\mathrm{M}}^{\mathrm{a}}{\mathrm{L}}^{\mathrm{b}}{\mathrm{T}}^{\mathrm{c}},$ then the physical quantity will be

(1) pressure if a=1, b=-1, c=-2

(2) velocity if a=1, b=0, c=-1

(3) acceleration if a=1, b=1,c=-2

(4) force if a=0, b=-1, c=-2

If the error in the measurement of the radius of a sphere is 2%, then the error in the determination of the volume of the sphere will be:

1. 4%                                                   2. 6%

3. 8%                                                   4. 2%

Consider the following equation of Bernoulli’s theorem-

$\mathrm{P}+\frac{1}{2}{\mathrm{\rho V}}^2+\mathrm{\rho gh}=\mathrm{K}\left(\mathrm{constant}\right)$

The dimensions of K/P are the same as that of which of the following?

(1) Thrust                         

(2) Pressure

(3) Angle                         

(4) Viscosity

In an experiment four quantities a, b, c and d are measured with percentage error 1%,2%,3% and 4% respectively. Quantity P is calculated as follows P=a³b²/cd %, Error in P is

1. 14%

2. 10%

3. 7%

4. 4%

If force (F), velocity (v) and time (T) are taken as fundamental units, then the dimensions of mass are

(1) [FvT^-1]

(2) [FvT^-2]

(3) [Fv^-1T^-1]

(4) [Fv^-1T]

If dimensions of critical velocity v_c of a liquid flowing through a tube are expressed as [$\eta$^xρ^yr^z]  , where $\eta$, ρ and r are the coefficient of viscosity of the liquid, the density of liquid and radius of the tube respectively, then the values of x,y and z are given by

1. 1, -1, -1

2. -1, -1, 1

3. -1, -1, -1

4. 1, 1, 1