The unit of thermal conductivity is:

1.	W m–1 K–1	2.	J m K–1
3.	J m–1 K–1	4.	W m K–1

In an experiment, the percentage errors that occurred in the measurement of physical quantities \(A,\) \(B,\) \(C,\) and \(D\) are \(1\%\), \(2\%\), \(3\%\), and \(4\%\) respectively. Then, the maximum percentage of error in the measurement of \(X,\) where \(X=\frac{A^2 B^{\frac{1}{2}}}{C^{\frac{1}{3}} D^3}\), will be:
1. \(10\%\)
2. \(\frac{3}{13}\%\)
3. \(16\%\)
4. \(-10\%\)

The velocity \(v\) of a particle at time \(t\) is given by \(v=at+\dfrac{b}{t+c}\), where \(a,\) \(b\) and \(c\) are constants. The dimensions of \(a,\) \(b\) and \(c\) are respectively:
1. \(\left[{LT}^{-2}\right],[{L}] \text { and }[{T}]\)
2. \( {\left[{L}^2\right],[{T}] \text { and }\left[{LT}^2\right]}  \)
3. \( {\left[{LT}^2\right],[{LT}] \text { and }[{L}]}  \)
4. \( {[{L}],[{LT}] \text { and }\left[{T}^2\right]}\)

Dimensions of resistance in an electrical circuit, in terms of dimension of mass M, length L, time T, and current I, would be:

1. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-3}{\mathrm{I}}^{-1}\right]$

2. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-2}\right]$

3. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-1}{\mathrm{I}}^{-1}\right]$

4. $\left[{\mathrm{ML}}^2{\mathrm{T}}^{-3}{\mathrm{I}}^{-2}\right]$

The dimensions of ${\left({\mathrm{\mu }}_0{\mathrm{\epsilon }}_0\right)}^{-1/2}$ are:

1.  $\left[{\mathrm{L}}^{-1}\right]$ $\mathrm{T}$

2.  $\left[{\mathrm{LT}}^{-1}\right]$

3.  $\left[{\mathrm{L}}^{-1/2}\right]$ ${\mathrm{T}}^{1/2}$

4.  $\left[{\mathrm{L}}^{-1/2}\right]$ ${\mathrm{T}}^{-1/2}$

The main scale of a vernier callipers reads 10 mm in 10 divisions. 10 divisions of Vernier scale coincide with 9 divisions of the main scale. When the two jaws of the callipers touch each other, the fifth division of the vernier coincides with 9 main scale divisions and the zero of the vernier is to the right of zero of main scale. When a cylinder is tightly placed between the two jaws, the zero of vernier scale lies slightly behind 3.2 cm and the fourth vernier division coincides with a main scale division. The diameter of the cylinder is.

(1)  3.10 cm

(2)  3.8 cm

(3)  3.09 cm

(4)  -3.09 cm